Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: 1200x800 coffee table
-
11th February 2012, 07:13 PM #1Senior Member
- Join Date
- Apr 2011
- Location
- Brisbane
- Posts
- 103
1200x800 coffee table
Here's a coffee table i've been building for a while- did the top seperately from the frame back around christmas, and did the frame last weekend, minus the brackets to attach the top to. finished that off this arvo.
the top is made from 90x19 jarrah bordering 40x19 merbau slats. finished with feast watson danish oil. frame is the usual- 38.1x1.6 stainless, tigged and blended back to 180 grit finish.
some pics:
-
12th February 2012, 09:29 AM #2Mechanical Butcher
- Join Date
- Oct 2004
- Location
- Southern Highlands NSW
- Posts
- 911
Nice one. I like mixing wood and metal.
I'll have a cuppacino, please.
Jordan
-
16th February 2012, 11:51 PM #3
You have very nicely finished the welds, it's something that really needs to be done well on stainless, otherwise the job looks terrible. Well done.
Check my facebook:rhbtimber
-
17th February 2012, 05:23 PM #4Senior Member
- Join Date
- Apr 2011
- Location
- Brisbane
- Posts
- 103
thanks guys.
i've done a few pieces in stainless now and you are right, being careless in the finishing can and will show up like a sore thumb at the end of the road.
i've gotten some tips from a member on here to apply to the next piece, which will hopefully be even better as this one still is not 100% picture perfect on the joins. i am a bit of a perfectionist when it comes to this stuff