Results 1 to 8 of 8
  1. #1
    Join Date
    Jul 2011
    Location
    Auckland
    Posts
    4

    Default Hi from lil ole NZ

    Hi everyone,

    Cruising thru web looking for ideas on how to make a Router Table Bench (still searching) when I came accross this site, read a few posts and you come accross as very freindly, so thought I would join.

    Left school and did served my time as a Turner / Machinist in a Steel Mill in N. Wales, UK.

    Always had a hankering to Play with wood, and everytime I find a need to unwind I find myself in the garage making something or other, by no means an expert as I have already seen some of the pics on this site, the Japenese Knife Block for one example.

    I am not into big builds more your med to small, in my youth I used to dabble in Marquetry.

    Just comming to the end of building a firewood box, did not need to go to the extent it did go, but the old man always used to drum into me as a kid, "if a job is worth doing it's worth doing to the best of your ability"

    Anyway that's a bit about who I am, must go and search for photo's of a Router Table to copy, got the Router, Table Top, just need to figure out how to make the Fence and or anything else required.

    Cheers for now
    Dave.

  2. #2
    Join Date
    May 2010
    Location
    Wellington, NZ
    Posts
    0

    Default

    Welcome! good to see another NZer here...

  3. #3
    Join Date
    Nov 2010
    Location
    Eatons Hill Queensland
    Posts
    0

    Default

    Welcome to another Kiwi....geez we are going to have to make it another State soon , or is that another two states? Welcome Dave....you might find the Gifkins web site of interest as there are some good ideas and plans there for a router table......cheers Kerry

  4. #4
    Join Date
    Jul 2011
    Location
    Auckland
    Posts
    4

    Default

    Thanks for the web site Kerry, just what I was looking for.

  5. #5
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome

  6. #6
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum. Are you going to do a work in progress for the router table build?

  7. #7
    Join Date
    Jul 2011
    Location
    Auckland
    Posts
    4

    Default

    never actually thought of a work in progress, but I guess no reason why not, tho it will more than likely be built out of metal rather than wood as per the link from Kerry, for definate the top is going to be 8mm Aluminium. Not keen on having to make a different fence for each type of cutter as link portrays so trying to come up with a fully adjustable one/type.

  8. #8
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Still good to see a work in progress. I am mainly into the wood side of the forum and every now and then I look at the metal side.

    Always good to watch construction. Just a way of seeing how things are created by people. May not be the way that everyone works as everyone is different.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •