![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: Speed of sound in a material
-
26th December 2010, 02:55 PM #1
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Perth
- Posts
- 0
Speed of sound in a material
Stolar why did you close the other thread off,
I just wanted to make sure that an agreeance was reached, are we now agreeing that speed of sound is different dependant on the angles its pumped into the material, I ask becuase you said prove it, so when I went to provide proof you had already closed the thread off. if we are in agreeance, excellent... Merry Christmas
-
26th December 2010, 03:04 PM #2
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Perth
- Posts
- 0
Since I went to the trouble of actually taking photos for the disagreement. here they are
Photo 1 a block with ruler
-
26th December 2010, 03:06 PM #3
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Perth
- Posts
- 0
photo 2, note the velocity reading of the sound wave and the angle the sound wave is put into the material
-
26th December 2010, 03:08 PM #4
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Perth
- Posts
- 0
Photo 3
Different angle with a different sound velocity reading, hence sound dependant on how it is introdiced into the material will travel at different speeds
-
26th December 2010, 03:08 PM #5
Similar Threads
-
How do you make a dog sound like a cat?
By ryanarcher in forum JOKESReplies: 4Last Post: 1st April 2005, 08:54 PM