Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2010
    Location
    Brisbane
    Posts
    3

    Default what stain to use with shellac

    Hi,

    I wish to apply a stain to Aust. red cedar and then finish with a few coats of shellac. I have tried Wattyl Traditional Stain, but the shellac tends to wash some of the stain off. Does anyone know of a stain (such as Feast Watson etc) that can be used with shellac?

    cheers
    steve

  2. #2
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,670

    Default

    All water based stains/dyes, all chemical dyes, most turpentine stains. No alcohol based stains as they are pulled off into the shellac.


  3. #3
    Join Date
    Apr 2010
    Location
    Indonesia
    Posts
    45

    Default

    How do you apply the shellac? If you apply the shellac by wiping, padding or brushing, sure it will resolve some of the stain underneath.
    The best way is to coat the shellac by spray.
    Or you can try to tint the shellac with a dye or aniline then apply on your wood.

    Good luck

    wisno

Similar Threads

  1. Shellac Pre-stain conditioner?
    By Ian Butler in forum FINISHING
    Replies: 2
    Last Post: 29th May 2010, 12:35 PM
  2. Stain under Shellac
    By bigAl in forum FINISHING
    Replies: 3
    Last Post: 16th August 2007, 10:58 AM
  3. Stain Under Hard Shellac
    By Mmcbain in forum FINISHING
    Replies: 2
    Last Post: 3rd June 2004, 12:42 PM
  4. Need help: Shellac over wood stain
    By daveh in forum FINISHING
    Replies: 6
    Last Post: 4th March 2004, 12:17 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •