![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Facia trouble
-
4th May 2010, 11:57 PM #1
New Member
- Join Date
- Apr 2009
- Location
- Bundaberg
- Posts
- 1
Facia trouble
Gday all, i am in a bit of a bother, i am about to compete at the Worldskills Australia national titles, representing widebay and QLD. The task i have ahead of me is to knock up a gazebo made of treated pine, they have sent out a pre comp pack but it is very limited with detail and the plan is to be changed by 30% on competition day. My trouble is, that on two of the sides the facia is normal and level with the rafters, however on ethier end the facia rakes from the the bottom of the top chord to the ridge board. i am having a bit of trouble getting my angles right... the roof is to be pitched at 30*.... any help would be fantastic
Cheers
Gibbsy
-
5th May 2010, 07:04 PM #2
hi gibbsy
my best bet would be to go one of the local roof truss building companies and have a talk to them let them know that its for a national comp representing the area and qld and see if they can show you as most of them make wall frames as well as roof trusses and going off builders plans to take off for their construction
if no good try giving hyne timbers a go and speak to one of the staff
troy
Similar Threads
-
Electrical Mains Connection to Facia
By ubeaut in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 0Last Post: 16th November 2008, 07:10 AM