Results 1 to 5 of 5
Thread: Organoil is that it?
-
18th September 2004, 09:36 PM #1
Novice
- Join Date
- Jun 2002
- Posts
- 2
Organoil is that it?
I have recently used this oil and find it great! I'm making a DVD cabinet and basically a beginner; although I have all the tools
Is it worth applying a wax after this? It looks good as is, and I'm thinking about longevity!
-
18th September 2004, 10:10 PM #2
The typo kign
- Join Date
- Aug 2003
- Location
- Melbourne - Outer East Foothills
- Posts
- 1,557
Yes a good wax finish and a buff just tops it off.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
19th September 2004, 08:29 AM #3
Novice
- Join Date
- Jun 2002
- Posts
- 2
Any recommendation on wax type/brand?
The DVD cabinet in made out of Pine, Teak and Rose Gum
kazuy
-
19th September 2004, 08:48 AM #4
The typo kign
- Join Date
- Aug 2003
- Location
- Melbourne - Outer East Foothills
- Posts
- 1,557
Check out the Ubeaut site and get some Traditional Wax. If it's not available locally, they are very good with mail orders. While you are at it, get some EEE Polish, Tripoli Powder and maybe some Hard Shellac. All the instructions come with the product but also check out Neil's Polisher's Handbook. It's the finishing bible.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
25th September 2004, 01:38 PM #5
Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
I favour leaving it as is. As noted on the grain filling thread, adding a wax finish over the top makes it prone to water spots or rings.
Cheers, Ern
Reply With Quote
Bookmarks