Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2004
    Location
    London, Ohio
    Age
    89
    Posts
    524

    Default WOODWORKING QUIZ for 10 Aug 04

    Good Evening Friends,
    Now that you have learned to read the wood and found the best method to assemble the table top.

    How are you going to place match marks so after you install biscuits, splines, and glue to realign the boards as you assemble them in your clamps?

    Respectfully,
    Ralph Jones Woodworking
    London, Ohio

  2. #2
    Join Date
    Mar 2003
    Location
    Wauchope NSW
    Age
    80
    Posts
    0

    Default Tonights Quiz

    Hi Woodies
    This is my first quiz answer my method is to mark the first joint from one side with single pencil mark across both boards then two on second join and so on. this works for me .
    Cheers Tony
    Tony

  3. #3
    Join Date
    Feb 2004
    Location
    Oxley, Brisbane
    Age
    79
    Posts
    537

    Default

    A large triangle drawn in chalk across the top of the table is all you need.
    Bob Willson
    The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.

  4. #4
    Join Date
    Apr 2004
    Location
    London, Ohio
    Age
    89
    Posts
    524

    Default WOODWORKING QUIZ ANSWER for 10 AUG 04

    Good Evening Friends,
    The chalk method is fine if this is the method you care to use and a pencil match mark is hard to sand out. What I care to do is place masking tape where I intend to install the biscuits and place my mark on it as well as number the sequences such as (1-1, 2-2, 3-3, etc.). Then you don't have to worry about sanding out the pencil marks.

    Thank you for your support.

    Respectfully,
    Ralph Jones Woodworking
    London, Ohio

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •