I am having troubles with these washers for my shower.
First i put in a 12ltr saver and it made a loud hum or whistle through the pipe when the cold was turned on.
My guess is the noise is the water pushing through the small hole in the washer.

So i put in a 9 ltr in and now i have alot less pressure , noise is still there very slighhtly and the hot seems to fade in and out.

so i have taken it out.
no noise, good pressure but...
I am probably using 30 odd ltrs per minute now. :)(
the shower head is a round flat type.


I have a gas boost, solar panel with storage tank on the ground.

How can i solve this problem?


Read the full thread at RenovateForum.com...