![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
21st July 2009, 04:30 PM #1
Attaching flush pulls - a question
Hi all,
just a silly novice question I guess - I have hung a large sliding door in a hallway in my home and have purchased a couple of nice 'architectural' flush pulls to go in it. The pulls are 250mmx50mmx16mm(LxWxD) stainless steel and don't act come with any pre-drilled holes for mounting and the chap at the door hardware place I purchased them from suggested that most builders just glue them in - so I guess I just wanted to confirm this to be a satisfactory method and also find out the right glue to use?
Many thanks for your time.
Beers
Mick.
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
Single flush-Dual flush
By davo453 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 3Last Post: 21st March 2006, 09:58 PM