Results 1 to 15 of 15

Thread: Dead dvr

  1. #1
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    247

    Angry Dead dvr

    What a wonderful way to end the week!!!!

    Went to the workshop to spin up a quick pen and found the ELCB operated. Turned off everything that came off of the circuit then reset the switch.

    At first I suspected the compressor as being the culprit so left it until last.

    Switched on the radio, it worked
    Switched on the grinder, it worked
    Switched on the Lathe.......pops from the lathe and the safety switch operated

    !@#E@*Y&(&TE$#!)(@#&_)(*(#)!@E)!@(&)#(&!@)(#&#$_

    and that is the censored version

    I am now awaiting a call from Jim Carol to find out who to send it to so it can be repaired.
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  2. #2
    Join Date
    May 1999
    Location
    Tooradin,Victoria,Australia
    Age
    74
    Posts
    2,515

    Default

    Bummer!!.

  3. #3
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    247

    Default

    And NO.... I will not be in the market for a Stubby!!!!
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  4. #4
    Join Date
    Dec 2005
    Location
    Emerald, QLD
    Posts
    0

    Default

    My lips are sealed
    .
    Updated 8th of February 2024

  5. #5
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    0

    Default

    Brudda, you need to pull out every plug; switch is not enuff.

    Assume this circuit is just for the shed? O/wise, devices with water around are prone to throwing the RCD, like washers and cordless kettles. (EDIT: do you have any water using or heating devices in the shed? eg. aquarium heater for home brew?

    If no luck there ....

    If it were me I'd pull the red plate off and vac out all dust; I'd chk the power toggle switch with a multi-meter with power lead removed 30 mins b4hand.

    I'm afraid that the grapevine reports PCB failures but let's hope it doesn't get to that.

    Good luck.
    Cheers, Ern

  6. #6
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    247

    Default

    Done ALL of that and more ERN... the dead give-away was the smoke coming out of the control box.

    Called Carbatec, and am going down on monday to see if I can get it repaired.
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  7. #7
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    0

    Default

    erk, you didn't mention smoke
    Cheers, Ern

  8. #8
    Calm's Avatar
    Calm is offline Stubby Owner and proud of it. Now coming back to Earth.:D
    Join Date
    May 2006
    Location
    Niddrie, Victoria
    Age
    68
    Posts
    0

    Default

    i say nuffink
    regards

    David


    "Tell him he's dreamin."
    "How's the serenity" (from "The Castle")

  9. #9
    Join Date
    May 1999
    Location
    Tooradin,Victoria,Australia
    Age
    74
    Posts
    2,515

    Default

    Quote Originally Posted by Calm View Post
    i say nuffink
    Just as well.

  10. #10
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    247

    Default

    Quote Originally Posted by Calm View Post
    i say nuffink

    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  11. #11
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    247

    Default

    Quote Originally Posted by rsser View Post

    I'm afraid that the grapevine reports PCB failures but let's hope it doesn't get to that.

    Yep I am pretty POed.. after all it is only 10 year old!!!!
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  12. #12
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    0

    Default

    If this had been in the OP
    the dead give-away was the smoke coming out of the control box
    I wld've said nuffink as well.

    Not happy Jan.
    Cheers, Ern

  13. #13
    Join Date
    May 1999
    Location
    Grovedale, Victoria Australia
    Age
    66
    Posts
    2

    Default

    You do realise kev that it is a cardinal sin to let the smoke out of anything electrical
    Jim Carroll
    One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
    Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!

  14. #14
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    84
    Posts
    0

    Default

    Quote Originally Posted by Jim Carroll View Post
    You do realise kev that it is a cardinal sin to let the smoke out of anything electrical
    I just turn the other way when I smell smoke.
    Reality is no background music.
    Cheers John

  15. #15
    Join Date
    Jul 2001
    Location
    South Australia
    Posts
    0

    Default

    Quote Originally Posted by Calm View Post
    i say nuffink
    Nice shiney lathe David.

    Looks like it was owned by a little old lady who only used it in Sundays.

    Cheers

    Tim
    Some days I turns thisaway, somedays I turns thataway and other days I don't give a stuff so I don't turn at all.

Similar Threads

  1. Dead TV
    By masoth in forum HINTS & TIPS
    Replies: 7
    Last Post: 1st June 2007, 01:32 PM
  2. I'm not dead
    By bennylaird in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 33
    Last Post: 10th January 2007, 02:35 PM
  3. How to tell if a cat is dead
    By silentC in forum JOKES
    Replies: 3
    Last Post: 20th October 2004, 08:41 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •