![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Bulletproof finish for plywood
-
8th April 2014, 12:49 AM #1
New Member
- Join Date
- Dec 2012
- Location
- Perth
- Posts
- 2
Bulletproof finish for plywood
G'day all,
Recently I find myself making a lot of fixtures and other components for various bits of machinery out of wood. These are likely to be exposed to oil, water and all sorts of other fluids from chloroform to toluene. I get a lot of cheap 19mm 5-ply (ex packing material) which is great to hack stuff together with, so most of this relates to cheap and nasty wood, although when I tried this on MDF it took about 9 coats to get the wood to stop absorbing the paint (without the sealer first).
I've been using White Knight Rust Guard Enamel over the top of Minwax sanding sealer. I don't mind the 24hrs between coats or any of the other baggage that slow curing enamel comes with because after a month it's cured to a point the wood is pretty well protected and takes all the abuse I can throw at it.
I started using the Minwax sanding sealer recently because I was finding I could lay 5 coats of the enamel on and the end grain would just keep soaking it up. I know its not the right product to use, but after hours at Masters and Bunnings it was about the best I could come up with, and it does appear to seal the wood nicely.
I just wonder for this kind of use (where it does not have to look pretty - all mine is Red because I got a good deal on a couple of litres) but needs to cope with both chemical abuse and the weather, what would be the right stuff to use? Once this stuff has cured, about the only thing that turns it to mush is Methylene Chloride (paint stripper or gasket remover) and thankfully I don't play with that much.
I guess I'd be pretty happy just being pointed at an appropriate sealer/primer I could use under the White Knight to stop the wood soaking up the paint. The Minwax seems ok, but it's water based and feels pretty soapy. On the other hand, it dries in an hour and is easy to brush on.
-
8th April 2014, 07:37 PM #2
GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 610
Not really sure but when I've wanted a total sealer for endgrain I've used marine epoxy. Nothing else is better at keeping water out, and and I have no problems painting over it.
Ps, where do you buy toluene ?
ArronApologies for unnoticed autocomplete errors.
-
9th April 2014, 09:40 PM #3
New Member
- Join Date
- Dec 2012
- Location
- Perth
- Posts
- 2
Cheers for that! I'll head to the local caravan and fishing place and pick up some 2 pack primer. I kinda wanted to avoid that if I could as I like to spray it sometimes, but I suppose a brushed on primer coat and then a light sand before spraying the top would do just as well. Waterproof is the key. Function over fashion.
I get Toluene at the local Colli & Sons hardware. It's behind the counter so you have to ask for it. It's a standard Diggers brand, so I guess you'd be able to special order it from anywhere.
Similar Threads
-
Best way to pre- finish plywood?
By Dengue in forum FINISHINGReplies: 6Last Post: 2nd January 2014, 03:56 PM -
How to finish plywood for outdoor?
By mogadon in forum FINISHINGReplies: 3Last Post: 24th January 2012, 06:49 PM -
Plywood Workbench - Best way to finish?
By DustInOz in forum FINISHINGReplies: 6Last Post: 20th February 2010, 10:23 PM -
Clear finish for a plywood cabinet - what should i do!?
By sloppycoder in forum FINISHINGReplies: 4Last Post: 11th March 2008, 04:17 AM