Results 1 to 4 of 4

Thread: Here's a Tip!

  1. #1
    Join Date
    Jul 1999
    Location
    Brisbane, Qld.
    Age
    48
    Posts
    579

    Red face Here's a Tip!

    Not a good idea to cut brass piano hinges to length with the compound mitre saw!


    (don't ask......But lets just say I have a very small mark just above my eye )

    [This message has been edited by Shane Watson (edited 01 March 2002).]

  2. #2
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    247

    Post

    Neil, Take Note!


    Shane, you need to submit that one to the BB at woodnet.

    See:
    http://ubb.ubeaut.com.au/ubb/Forum21/HTML/000019.html

    In "have your say"

    [This message has been edited by Brudda (edited 02 March 2002).]
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  3. #3
    Join Date
    Jul 2000
    Location
    Drop Bear Capital of Gippsland (Lang Lang) Vic Australia
    Age
    74
    Posts
    2,238

    Exclamation

    Number five across, large migratory bird, five letters, starts with 'G'...

    And to outline mine, my belt sander stopped suddenly and refused to start again. Took it to a tool repair place where it worked perfectly. The tech was grinning and was aware of a power failure in the area, I wasn't.
    Stupidity kills. Absolute stupidity kills absolutely.

  4. #4
    Join Date
    Feb 2002
    Location
    burleigh heads
    Posts
    5

    Thumbs down

    Picture this december 29 half hour till beer o'clock ripping last peice of decking 600mm long down the middle, stopped cut 100mm from end supported timber in the middle on saw horse held the timber BEHIND horse with left hand (you know whats coming) KICK BACK thumb off at the joint. Three days in gold coast hospital,micro sergery out on new years eve, back to work tommorow with none bending thumb and bruised ego. I grew up with power tools in my hand should have known better. lesson learnt the hard way. Tip: must have accident insurance I would be stuffed with out it. given me good time on my lathe though.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •