![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
16th November 2008, 07:03 AM #1
Small extension and how to create the floor
Hi guys,
Doing a small extension on our kitchen and just had a question on the floor. The floor at the moment is TnG pine. The extension is going to be roughly 3m x 1m which extends out past the end of the boards, ie, the ends of the boards will all butt up to the wall, rather than a single board running parallel to the wall.
Now, I'm putting the bearer etc up, but was woondering how I fasten the end of the new boards and studs for the wall.
My question is, after having the bearer there, do I put the floorboards right out and over the top of the bearer, then put the studs on top of that?
OR
Do I put the studs on top of the bearer. If so, how/what do I attached the ends of the floorboards to?
Any help appreciated, and thanks in advance.
More...
Similar Threads
-
big floor tile cut to small
By SkyHook in forum TILINGReplies: 6Last Post: 27th March 2008, 05:55 AM -
Levelling small area of concrete floor
By Mcblurter in forum CONCRETINGReplies: 7Last Post: 10th September 2007, 01:52 PM