Results 1 to 14 of 14
  1. #1
    Join Date
    Aug 2012
    Location
    sa
    Posts
    13

    Default Help! Tung Oil Finish hasn't taken

    I've just finished oiling a kitchen bench with Tung Oil and let it sit for a few days before using it. A damp (not wet) sponge was left on it for a few minutes. It appears that the oil colour has leached out and the grain of the wood has risen in that spot. What have I done wrong? and does anyone know how I can fix it. The timber is Cypress Pine and it was properly stripped and well-sanded before the many coats of oil were applied.

  2. #2
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    So the damp sponge was put on the oil after it was left to dry? You can rectify the patch by sanding it back, probably to about 800g then add oil, one coat will be enough and wet sand up to where you finished before.

    First thing I can think of is to try applying another coat of oil after sanding the damaged piece of bench. Is the rest of the bench still OK? i.e. no signs of patchiness or raised grain?
    I suspect that the oil has not fully dried.
    It is unusual for the Tung oil not to have dried after some days but If you have put many coats on, it will take a little longer to dry. I usually leave it for a week. If you have some 1500 or 2000 grit left, give the whole bench a rub over and reapply the Tung Oil and then use the 2000 grit vigorously to sand the wet oil in. Then try leaving it for a week and see how it looks. It should be smooth and clear.
    Regards,

    Rob

  3. #3
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Tung oil can take a long time to dry properly (weeks). When sanding/applying, were you giving it 2-4 days between each coat?

  4. #4
    Join Date
    Aug 2012
    Location
    sa
    Posts
    13

    Default

    Quote Originally Posted by Master Splinter View Post
    Tung oil can take a long time to dry properly (weeks). When sanding/applying, were you giving it 2-4 days between each coat?
    Thanks! I left it 24 hours between each coat but the weather was really good so I thought that would be okay. I only gave it 4 days so I'll try to fix it up and then give it longer.

  5. #5
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    69
    Posts
    1,133

    Default

    did you use a pure tung oil or one which was polymerised or had dryers added to it?
    of course I can never find the reference when I need it, but somewhere I've read that the time between coats should be at least 24 hours and the final coat should be left for around 7 days before use.

    Because of the way true oils dry, I don't think the weather has much influence -- provided we'e not talking days on where the max tempurature is less than 15° C
    regards from Alberta, Canada

    ian

  6. #6
    Join Date
    Aug 2012
    Location
    sa
    Posts
    13

    Default

    Quote Originally Posted by ian View Post
    did you use a pure tung oil or one which was polymerised or had dryers added to it?
    of course I can never find the reference when I need it, but soesmewhere I've read that the time between coats should be at least 24 hours and the final coat should be left for around 7 days before use.

    Because of the way true oils dry, I don't think the weather has much influence -- provided we'e not talking days on where the max tempurature is less than 15° C
    The product I've used only has limonene added which as I understand it is a citrus thinner. As it was the only thing I could find around here that was what I went with.

    To follow up your response, Rob, only the patch where the sponge was left was affected and I sanded that lightly and applied more oil. You can still see a ghost of a mark so I think I'm going to apply more oilto the whole bench and rub in as you suggested. Hopefully, this will all work because the finish looks fabulous apart from the mark and I would dearly love to have a working kitchen again.

  7. #7
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    That's great. Hope it works out well for you. It will be worth the agony though, I think.

    Regards
    Rob

  8. #8
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    69
    Posts
    1,133

    Default

    Hi Ghowe

    how did re-oiling your bench come up?
    regards from Alberta, Canada

    ian

  9. #9
    Join Date
    Aug 2012
    Location
    sa
    Posts
    13

    Default

    Quote Originally Posted by ian View Post
    Hi Ghowe

    how did re-oiling your bench come up?
    Unfortunately, if you know where to look you can still see the ghost of the sponge mark but I can live with that. I've done a small test to see if it's likely to happen again and it seems alright. It's now been about 10 days since the repair job so over the weekend my husband will be putting the sink and stove back and the real test under fire of the water resistance will begin. If there still appears to be problems I think the only thing to do will be the varnish over the top which will be very disappointing so fingers crossed...

  10. #10
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Waiting as well.

  11. #11
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    69
    Posts
    1,133

    Default

    thanks for the update

    let us know how it turns out
    regards from Alberta, Canada

    ian

  12. #12
    Join Date
    Aug 2012
    Location
    sa
    Posts
    13

    Default

    Quote Originally Posted by ian View Post
    thanks for the update

    let us know how it turns out
    Sink and stovetop went back in yesterday. First meal prepared and dishes washed. All seems to have gone well. I can't see any marks caused by splashes or wiping down. So far, so good. And, of course, looks great.

  13. #13
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    Hi Ghowe,

    Never doubted you'd get it right!
    Excellent!

    Regards,

    Rob

  14. #14
    Join Date
    Aug 2012
    Location
    sa
    Posts
    13

    Default

    Quote Originally Posted by LGS View Post
    Hi Ghowe,

    Never doubted you'd get it right!
    Excellent!

    Regards,

    Rob
    Thanks for all your help, Rob.

Similar Threads

  1. Loudspeakers (Tung Oil finish)
    By gainphile in forum FINISHING
    Replies: 25
    Last Post: 10th September 2012, 08:48 AM
  2. tung oil finish!
    By bustler74 in forum FINISHING
    Replies: 16
    Last Post: 12th May 2012, 12:20 AM
  3. Pure Tung Oil Finish
    By kandiman in forum FINISHING
    Replies: 7
    Last Post: 25th July 2009, 05:37 PM
  4. Tung Oil Finish Thickening In Can
    By Paul39 in forum FINISHING
    Replies: 4
    Last Post: 6th July 2009, 04:51 PM
  5. MDF FINISH - Tung/Poly/Wax
    By dazzler in forum FINISHING
    Replies: 3
    Last Post: 13th February 2006, 04:56 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •