![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 33
Thread: Glasses
-
4th August 2012, 08:50 PM #1
GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 0
Glasses
As I'm nearing the magic half century I've found that my eyesight, over the last six months, is starting to decline. I have trouble reading and need to focus intently to make out the words. Of late, I've found myself squinting when on the lathe. I have no problems what-so-ever with distance. I made an appointment with the optometrist today and scored some specs. WOW, these things are magic, I feel young again! Especially at the lathe, I can now work on detailed bits and pieces.
Do you guys wear anything over your glasses? Or do you just wear the glasses alone? I know it's a bit of a silly question but not having worn these things I'd like to know what the general consensus is.-Scott
-
4th August 2012, 08:59 PM #2
You can get safety glasses made to a script. But I tend to wear a face shield when turning anyway and on the table saw, etc, I use a pair of safety glasses that fit over my seein' specs. Get them from most of the safety/ tool shops.
CheersThere ain't no devil, it's just god when he's drunk!!
Tom Waits
-
4th August 2012, 09:13 PM #3
Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
Scott, I always wear a standard face shield when turning and when using a grinder or angle iron.
If your glasses are made of plastic it's not essential when using a grinder but the minute sparks will burn pits in the glass of your glasses. DAMHIK.
Peter.
-
4th August 2012, 09:22 PM #4
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Glasses and full face shield for anything that cuts, drills and grinds. Add ear muffs for noise.
-
4th August 2012, 09:28 PM #5
GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 0
Cheers, thanks for your input. Might look into prescription safety glasses but in the meantime, I'll use a shield over the glasses.
-Scott
-
4th August 2012, 09:32 PM #6
Awaiting Email Confirmation
- Join Date
- Jul 2011
- Location
- Chirnside Park, Australia
- Age
- 75
- Posts
- 3
Woodwork ok but need to watch metal grinding as hot sparks can damage the lens.
-
4th August 2012, 09:44 PM #7
SENIOR MEMBER
- Join Date
- Jan 2007
- Location
- Brisbane
- Posts
- 186
Both
I work in a mine and I do both. Safety glasses over my normal glasses when I'm underground and my prescription safety glasses in the open cut and mill areas.
-
5th August 2012, 08:52 PM #8
The Glasses.
Hi Scott,
I have now been wearing Multifocal Plastic Glasses for many years.
Have never used a Face Shield as I couldn't stand them, but on Occasions I wear a Yellow Plastic Safety Coverall Glasses.
The Colour is really good for Turning as the Wood Virtually comes out at you.
When you take these Glasses off, you get to think someone turned the lights out.
I didn't but the real expensive ones, & I think the last set cost $ 7.00.
They look a bit cumbersome but do the job really well. The ones I'm referring to are a bit " Old hat " but do the job.Regards,
issatree.
Have Lathe, Wood Travel.
-
6th August 2012, 03:06 AM #9
I have the same problem, the optometrist said I don't need prescription glasses yet, he said to use the magnifying reading glasses so looking around I came across these.
I get these from Rockler,
FastCap Bifocal Safety Glasses - Rockler Woodworking Tools
If I am working out side I use these,
Tinted Diopter 2.0 Safety Glasses - Rockler Woodworking Tools
Ratty 05/2004 -05/07/2010 COOPER 01/08/1998-31/01/2012
-
6th August 2012, 05:08 AM #10
GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 0
Eye safety for me is an absolute must. I think I'd likely die of a broken heart if I ever lost my sight. I wear "progressive" bifocal glasses, I can actually see what I'm eating and watch TV at the same time! I put safety goggles over my glasses for almost all power tool work, especially with the drill press and any metal work.
I'm considering a full face shield for table saw work = 72 tooth x 10" table saw blade. One t/c tooth broke off and hit me in the forehead. Nice scab. Now, if that thing had hit me in an eye. . . . . .
-
6th August 2012, 08:03 AM #11
Wayne Davey sells the bi-focal safety glasses for about $16, I havent got any yet, but will soon.
-
6th August 2012, 09:13 AM #12
I just need magnifiers to read & do close work too, I found that the safety glasses with a magnifier built into the bottom of them work fine.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
6th August 2012, 09:58 AM #13
GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 0
Thank you for the great advice gents, especially wm460 for those links. Sounds like a purchase is coming on. Will look up Wayne Davey as well. Thanks again!
-Scott
-
6th August 2012, 03:05 PM #14
Fatscap Bifocal Safety glasses
Not sure about Wayne but I have them in stock: 1.5, 2.0, 2.5, 3.0 all at $12 +post
Take care and Stay Sharp,
Jim Davey
www.jimdavey-planes-sharpening.comTake care and Stay Sharp,
Jim Davey
-
6th August 2012, 04:22 PM #15
GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 0
Thought I was having a bit of trouble locating you Jim. Funnily enough there is a Wayne Davy on the forums who has a website:
Wayne's Woodwork
Was about to email him asking about safety glasses!
Anyway, I've placed an order on your website, Jim, and have paid using Paypal. Thanks for responding to this thread.
Cheers!-Scott
Similar Threads
-
Glasses...What's the story?
By underfoot in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 33Last Post: 19th July 2010, 10:27 AM -
must need glasses
By astrid in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 2Last Post: 26th May 2008, 02:30 AM -
I think I need glasses
By joe greiner in forum JOKESReplies: 1Last Post: 23rd March 2008, 08:54 AM