Results 1 to 10 of 10
Thread: The Ring Pulls,
-
12th December 2010, 05:00 PM #1
The Ring Pulls,
Hi to all,
A few years back a Friend, who is not with us now, asked a few of us to collect
" The Ring Pulls " that opened a can of Fruit, Baked Beans or whatever.
I still collect a few now, as they were supposed to have a whisker of Titanium in them.
The question is, are they still wanted, if so, who takes them & where do they go to.
I thought it was a Charity of some kind & I thought they went to S.A., but I am unsure about this.
Any info would be great.
Regards,
issatree.Regards,
issatree.
Have Lathe, Wood Travel.
-
12th December 2010, 05:19 PM #2
Was he a Freemason?
Vic Freemason's Ring-pull Drive
Most Ring-pull drives that I've heard of in the past turned out to be urban myths. But that one is dinkum, as far as I can tell.
- Andy Mc
-
12th December 2010, 07:33 PM #3
The Ring Pulls.
Hi Skew,
No he wasn't, but I think he had a Friend that was.
Thank you for that. The Penny has dropped, & I will seek out a couple of Chaps I know that are Masons & ask.
Thanks again.
Regards,
issatree.Regards,
issatree.
Have Lathe, Wood Travel.
-
12th December 2010, 09:24 PM #4Senior Member
- Join Date
- Apr 2009
- Location
- Deloraine
- Posts
- 0
ring pulls
as far as i can remember that was a lions club project in tas not sure about the big island.
-
13th December 2010, 10:04 AM #5
The Ring Pulls.
Hi John T,
Yes, John, that also rings the bell. I shall investigate further.
Thank You for your help.
issatree.Regards,
issatree.
Have Lathe, Wood Travel.
-
13th December 2010, 10:08 AM #6
Check your local primary schools as well, I collect mine for my friend for her 2 kids to take to school. From memory their school has been taking them in for the last 2 years. No idea what happens to them though.
Cheers
DJ
ADMIN
-
14th December 2010, 09:13 PM #7
Thank You.
Hi DJ,
That is another one I can try.
I did that adon thing, but did it work.
Was Ern the only one getting it.
Regards,
issatree.Regards,
issatree.
Have Lathe, Wood Travel.
-
14th December 2010, 09:29 PM #8Senior Member
- Join Date
- Apr 2009
- Location
- Deloraine
- Posts
- 0
ring pulls
HI DJ THEY FINISH UP ARTIFICAL HIP AND KNEE JOINTS WHICH I HAVE 1 AND 2
REGARDS JOHN.
-
14th December 2010, 09:34 PM #9
That Sounds like it.
Hi John,
All the bells are ringing now, so I have just to find the right place to send or give to.
Thanks Again
issatree.Regards,
issatree.
Have Lathe, Wood Travel.
-
14th December 2010, 10:01 PM #10
Similar Threads
-
Attaching flush pulls - a question
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 21st July 2009, 04:30 PM -
Lee Valley pulls a fast one.
By Dan in forum HAVE YOUR SAYReplies: 13Last Post: 14th September 2006, 02:04 AM
Bookmarks