Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2008
    Location
    Perth
    Posts
    0

    Default How did they do this?

    Hi all,
    I have the task of making an honour board to match an existing item as per photos.
    The existing item is made from 18mm MDF/Jarrah veneer, and I can make and route a panel to match without issue, except for the edge.
    Does anyone have any clues as to how this edge finish was produced? In the past I have sprayed a jarrah stain onto MDF edges , sanded and recoated and this has produced a good finish, but the whole board has a darker edge. It appears that this particular item has had some type of stain brushed (?) onto the routed edge and then coated. I am at a bit of a loss on how to replicate it.
    Any ideas?

  2. #2
    Join Date
    Aug 2007
    Location
    St Georges Basin
    Posts
    0

    Default

    Looks like solid timber edge to me. What's it look like on the back?

  3. #3
    Join Date
    Jul 2008
    Location
    Mandurah WA
    Age
    63
    Posts
    0

    Default

    Hey Allsport,

    Like Barraboy said, I would be gluing on a solid edge strip, and then doing the router job.

    HazzaB
    Last edited by HazzaB; 2nd October 2010 at 09:06 AM. Reason: spelling and punctuation repais
    It's Hard to Kick Goals, When the Ba^$%##ds Keep moving the Goal Posts.


    Check out my Website www.harrybutlerdesigns.com.au

  4. #4
    Join Date
    Nov 2008
    Location
    Mackay, Queensland
    Posts
    23

    Default

    the face and the edge are diffrent grain pattens. look at the back of the display, im with the rest - edge banding has been used

  5. #5
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,665

    Default

    Definitely an edge strip and you can probably buy it in the length pre moulded from any decent timber shop maybe even Bunnies.


Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •