![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
-
2nd November 2009, 01:06 PM #1
New Member
- Join Date
- Apr 2009
- Location
- Newcastle
- Posts
- 2
'Food safe' filling of recycled timber?
I'm making up some chopping boards (about 40!) out of some recycled ironbark to give away as gifts to my wedding guests later on this year.
My question is what would you use to fill in the old nail holes etc? Obviously it'll need to be 'food safe'. I was thinking that something like 'U Beaut Traditional Wax' might do the trick... Thoughts?
I have read the bulk of the posts about finishing oils but I couldn't find anything on fillers.
Cheers!!
-
2nd November 2009, 04:04 PM #2
Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
Nice idea bigred.
But no, trad wax is a finish.
Try Timbermate (at Bunnies) if the holes are not in an area that's going to get pounded. If they are, I'd suggest a mix of 50:50 sanding dust from the ironbark and epoxy.
If not enough sanding dust, fine coffee grounds (unused) also work but the colour match may be an issue.
Good luck.Cheers, Ern
-
2nd November 2009, 04:34 PM #3
You can buy blocks of shellac, that you heat and that will fill holes perfectly.
Or you can get normal shellac put it in a spoon and heat the spoon. The shellac melts and you pour it into the holes.
It is very durable, and completely food save and it looks really nice.
-
2nd November 2009, 04:54 PM #4
SENIOR MEMBER
- Join Date
- Nov 2006
- Location
- t
- Posts
- 79
Nice Idea but for foodsafe surfaces you really, really need to know the entire history of the timber. Are you 100% sure that it has never been coated with anything toxic in its life, has never been treated with pesticides or timber preservatives ever, have the nail holes got discolouration around them, thats metals leeched from the nails, if you are not 100% certain that the timber is toxin free, you are gambling with people's health.
And the best hole filler for cutting boards is parrafin wax, inert, non-toxic and allergen free..
-
2nd November 2009, 05:11 PM #5
.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 0
-
2nd November 2009, 05:20 PM #6
SENIOR MEMBER
- Join Date
- Nov 2006
- Location
- t
- Posts
- 79
I would suggest you research the toxicity of pest control chemicals and herbicides before suggesting there is no problem, both were/are used quite a lot in and around homes.
And that is only 2 examples, imagine a fence post that gets herbicide and pesticide spray drift 3 times a year for 40 years being cut up and used for a food preparation surface.
See signature..
-
11th November 2009, 01:10 PM #7
New Member
- Join Date
- Apr 2009
- Location
- Newcastle
- Posts
- 2
Thanks for all the replies!
Firstly the ironbark timber was initially used for rafters and was in the raw. Not painted, oiled or treated with any other obvious sealer etc. Having said that I've taken off a good 5mm in all dimensions in truing the boards any so the vast majority of any surface contaminants would've been taken away.
I'll be using Titebond II for board gluing which is USFDA approved for that sort of application where food is involved.
I've decided to use a snug plug cutter to fill in any of the old nail holes on the cutting surfaces as whilst many of the female population might be iron deficient I'm not planning on the chopping boards being used as a multi-vitamin!
Cheers
PS I'm a young doctor that's busy enough as it is, so obviously I'm go to lengths to avoid making people sick!
Similar Threads
-
Food Safe
By wheelinround in forum JOKESReplies: 2Last Post: 13th January 2009, 11:53 PM -
Finishing MDF - Food safe
By 4saken in forum FINISHINGReplies: 3Last Post: 24th March 2008, 12:14 PM -
food safe finishes??
By Tool Man in forum FINISHINGReplies: 12Last Post: 3rd April 2006, 12:09 AM