toilet installation - flushing problem??

[lobboroz]

Hi all
the plumber/builder yesterday installed our toilet (Aquadux Dux Jasmine model) and it seems to not flush properly? i have to basically hold the flush button, full or half flush, for like 3-5seconds before it would fully flush else theres not enough flow to remove all the waste. Does anyone know what might be wrong? or if there is a problem?
thanks in advance

[mic-d]

Hi all
the plumber/builder yesterday installed our toilet (Aquadux Dux Jasmine model) and it seems to not flush properly? i have to basically hold the flush button, full or half flush, for like 3-5seconds before it would fully flush else theres not enough flow to remove all the waste. Does anyone know what might be wrong? or if there is a problem?
thanks in advance

Try AllBran 14 day challenge

Derrin

[arms]

you will find that the pin in the cistern is set too low ,ring the manufacturer for directions
( see helpful comments ,not wasting time being or trying to be funny with a serious concern)

[Big Shed]

Or better yet call back plumber and tell him to finish the job properly!

[mic-d]

you will find that the pin in the cistern is set too low ,ring the manufacturer for directions
( see helpful comments ,not wasting time being or trying to be funny with a serious concern)

Nothing like a bit of toilet humour

Cheers
Michael

[lobboroz]

thanks for the 2 helpful posts

I spoke to the people who sold me the toilet, the distributor of aquadux at oakleigh and the plumber who did the job and they all said the same thing that its a feature of the toilet? saying that it some kinda economical water saving feature or something. If you hold onto it for a while (3seconds or so) it will do the full flush or half flush which ever you pressed but you can let go mid way if you think that was enough to flush the waste. I dunno if they all saying this to save their hide and reputation or the truth! but i guess i'll check the cistern pin if it starts to annoy me

[Ashore]

Nothing like a bit of toilet humour

Cheers
Michael

Don't get P!SSED mate , or FLUSHED in the face we all like a good joke its just the CISTERN here to GO the CRAP and POO POO some when we can't come back with a FOWLER reply when we are on our SHANKS and you are happy in your CORONA by the way are you a SEPTIC by any chance or born here ,have you noticed that some PEEpople are DUMPier than others who POINT. PERCY once said theres Nothing like a bit of toilet humor

All in jest Mick

[lesmeyer]

Maybe Kenny can help out over here. He is the most famous "#### burglar" in OZ.
Les

[RobP]

i have to basically hold the flush button, full or half flush, for like 3-5seconds before it would fully flush

We had the same problem after taking advantage of Sydney Water's $22 water saving initiative where they send a plumber out to fix your taps, shower and toilet to use less water. He modified the cistern to do just that. That mod was removed very soon after he left.