![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: Painting MDF
-
16th May 2009, 11:59 AM #1
New Member
- Join Date
- Dec 2008
- Location
- Sydney
- Posts
- 2
Painting MDF
Hi all,
I am constructing a shelving unit out of MDF (well, the shelves are going to be either 25mm or 32mm MDF supported on 1/2" threaded rods - shelves will be adjustable even though it's going to be a great pain to thread all the nuts on!) and I wanted to get a really smooth and glossy finish on the MDF.
I was wondering if there were any tricks to obtaining this kind of finish (sanding between coats, using a roller v brush, any particular products to look out for etc)?
And hints or advice would be greatly appreciated.
Cheers!
-
16th May 2009, 04:53 PM #2
Hi sedge,
I have just stained and varnished MDF. I sanded the MDF before applying any stain because a test I did beforehand showed me that sanding gave me a much better look with the stain.
I used Antique Walnut (waterbase) stain applied with a brush, sanded then applied a second coat of stain.
I then sanded again and applied a coat of waterbased varnish, with a brush, sanded then applied a second coat of varnish.
The link below should take you to my thread (My Bookcase) showing pics of the end result. I hope this is of some help to you.
Cheers
Nick
https://www.woodworkforums.com/showthread.php?t=96515“There’s no right, there’s no wrong, there’s only popular opinion.”
-
16th May 2009, 06:04 PM #3
SENIOR MEMBER
- Join Date
- Nov 2008
- Location
- Sydney
- Age
- 94
- Posts
- 0
Nick, somehow I have missed your original post showing your book case, lovely.
Thanks very much for this information, too. I am trying not to work with MDF nowadays, no disrespect to you, Sedge, and shall try your methods on ply.
-
17th May 2009, 11:28 AM #4
New Member
- Join Date
- Dec 2008
- Location
- Sydney
- Posts
- 2
Nick your bookcase looks fantastic.
What I've just realised that I omitted from my post is that I was thinking of painting, not staining/varnishing. Sorry for the confusion!
-
17th May 2009, 11:40 AM #5
Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 0
Sedge , lightly sand the surface to key up the 'wax' sealer in the mdf.
And prime and sand the edges as many times as is needed to achieve the same finish as the face .
Enamel paint is a better option that acrylic , and spraying give a smoother finish than brush or roller .
-
30th May 2009, 11:48 AM #6
New Member
- Join Date
- May 2009
- Location
- Townsville NQ
- Posts
- 1
I recently built an MDF bathroom vanity carcase, and finished it in Automotive 2 pack Used the recomended primer filler on it first, light sand with 400, then 1 coat of white over the top. Came up really well.
-
1st June 2009, 12:51 PM #7
Senior Member
- Join Date
- May 2007
- Location
- South Australia
- Posts
- 0
2 pack automotive paint shouldnt be used unless you have a proper spray booth and appropriate safety gear, its rather toxic.
Similar Threads
-
Not Quite Done Painting
By wheelinround in forum JOKESReplies: 3Last Post: 26th February 2008, 07:11 PM -
Help with Painting MDF
By MikeL in forum FINISHINGReplies: 9Last Post: 29th March 2005, 11:07 PM -
painting
By buggerme in forum PAINTINGReplies: 6Last Post: 17th December 2003, 05:13 PM