![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: WOODWORKING QUIZ for 10 Aug 04
-
9th August 2004, 09:39 PM #1
WOODWORKING QUIZ for 10 Aug 04
Good Evening Friends,
Now that you have learned to read the wood and found the best method to assemble the table top.
How are you going to place match marks so after you install biscuits, splines, and glue to realign the boards as you assemble them in your clamps?
Respectfully,Ralph Jones Woodworking
London, Ohio
-
9th August 2004, 10:34 PM #2
Senior Member
- Join Date
- Mar 2003
- Location
- Wauchope NSW
- Age
- 79
- Posts
- 0
Tonights Quiz
Hi Woodies
This is my first quiz answer my method is to mark the first joint from one side with single pencil mark across both boards then two on second join and so on. this works for me .
Cheers TonyTony
-
10th August 2004, 12:55 PM #3
A large triangle drawn in chalk across the top of the table is all you need.
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
10th August 2004, 09:34 PM #4
WOODWORKING QUIZ ANSWER for 10 AUG 04
Good Evening Friends,
The chalk method is fine if this is the method you care to use and a pencil match mark is hard to sand out. What I care to do is place masking tape where I intend to install the biscuits and place my mark on it as well as number the sequences such as (1-1, 2-2, 3-3, etc.). Then you don't have to worry about sanding out the pencil marks.
Thank you for your support.
Respectfully,Ralph Jones Woodworking
London, Ohio