Results 1 to 7 of 7
Thread: Acrylic gloss paint
-
2nd October 2007, 11:56 PM #1
Acrylic gloss paint
Hi,
Can anyone recommend a good acrylic gloss paint?
I came across "The Paint Shop", which has several branches in Melbourne. Anyone tried their products, any feedback?
Or should I stick to the mainstream brands like Wattyl, Dulux or Taubmans?
Thanks.
-
3rd October 2007, 12:12 AM #2Senior Member
- Join Date
- Dec 2006
- Location
- Outer East - Melbourne
- Posts
- 265
How do you want to use the acrylic gloss paint? What application? What method, brush, roller? What are your expectations?
-
3rd October 2007, 12:37 PM #3
I'm looking to paint new architraves and doors, which are pre-primed. Thinking of using brush. Am considering acrylic for ease of use/cleanup & less odour. Don't need it to be super glossy, just tougher than the standard acrylic wall paints.
-
3rd October 2007, 07:26 PM #4Senior Member
- Join Date
- Dec 2006
- Location
- Outer East - Melbourne
- Posts
- 265
I can only reply with my experiences. I used Solver brand acrylic gloss on new pre primed architraves, and found the results with a brush acceptable. I did our old doors with a short nap roller and was happy with those too. I did two new doors that were pre primed and maybe due to my technique, the result was not as good. The old doors were rolled in position standing up, and the two new doors were rolled laying flat on stands.
-
3rd October 2007, 09:40 PM #5Cro-Magnon
- Join Date
- Sep 2007
- Location
- Central Victoria, Australia
- Age
- 65
- Posts
- 93
In my limited experience, acrylic gloss is too prone to damage to use on or around doors. I've found that when scratched, such as bumped while moving furniture through a doorway, it starts to peel. I've not had the same problem with oil-based gloss.
-
4th October 2007, 12:47 PM #6Old Chippy
- Join Date
- Mar 2007
- Location
- Canberra
- Age
- 73
- Posts
- 52
I have just used the Dulux Aquanamel acrylic full gloss enamel (they have a semi-gloss too) for the first time. It goes on well although even though I use high quality brushes, brush marks are apparent. I used a small 6mm mohair roller and that worked better, but of course cutting-in needed a brush still.
Not sufficient to worry me and the ease of use with touch dry in 30 mins and re-coat in 2 hours, and clean-up with no turps (I used to use oil-based enamels) far outweighs the slightly lower gloss.
Dulux claims that this one is as hard as oil-based enamels while retaining the advantage of the flexibility of acrylic paints in general.
While oil-based paints are hard they get harder with age and tend to chip away and cracks at joins can become visible usually within a short time (a year or so and very much depending on climate).
Dulux claims that its paint is an enamel and is therefore harder and more durable for skirtings and architraves - regular acrylic gloss paint is not enamelised so tends to remain 'soft'.
Time will tell with this paint, but as I said the advantages of speed and water wash up are big for me and it looks pretty good too.
http://dulux.com.au/html/planning/pr...aquanamel.aspx
-
5th October 2007, 02:20 PM #7
Thanks to the 3 of you. I'll think further and see which way to go. But from my situation (short of time & paranoia about the smell & cleanup), I'll probably give the acrylic gloss a try, but add a small roller instead of using just brush. Cheers.
Similar Threads
-
Heat gun on Acrylic Paint
By bpj1968 in forum PAINTINGReplies: 1Last Post: 2nd October 2006, 09:04 PM -
Acrylic Paint
By maglite in forum PAINTINGReplies: 2Last Post: 16th September 2006, 10:46 AM -
I will NEVER use Acrylic to paint a table top ever again!!!!
By lateral in forum FINISHINGReplies: 11Last Post: 29th June 2006, 09:42 PM -
Spraying Acrylic paint on MDF
By pwill in forum FINISHINGReplies: 8Last Post: 15th November 2005, 11:15 AM -
If QANTAS sold paint ...
By DaveInOz in forum JOKESReplies: 2Last Post: 31st January 2003, 05:19 PM
Bookmarks