Results 1 to 8 of 8
Thread: Window condensation
-
30th April 2006, 03:57 PM #1
Window condensation
Hi All
I am living in a house that is less than 50 years old but has old wooden windows. The House is warm dry and has been recently renovated. Problem is that as we come into winter we close up the windows and close the doors to stay warm. When I wake up in the morning There is heaps of moisture on the windows and a puddle on the sill. I have a dehumidifyer going constantly on low and dont wish to be woken by it constanly going off by having it working harder. The condesation on the windows dries fast enough but the puddle on the sill is a issue.
Question is
Is there such a thing as a sill drain?
Thanks
Andrew"All that is necessary for evil to succeed is for good men to do nothing"
(Edmund Burke 1729-1797)
-
30th April 2006, 05:45 PM #2Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Some aliminium windows have a drain hole in the bottom which is covered on the out side by a strip of rubber.
Maybe you could do the same yourself.
Al
-
30th April 2006, 07:09 PM #3
I don't know that I'd drill a diagonal drain through a timber sill... unless I could work out some way to line it. Wouldn't want moisture being introduced to internal end-grain and offhand I can't think of any way to reliably waterproof the bore.
Last edited by Skew ChiDAMN!!; 30th April 2006 at 07:51 PM. Reason: Too reliable. :o
- Andy Mc
-
30th April 2006, 07:37 PM #4Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Originally Posted by Skew ChiDAMN!!
Al
-
30th April 2006, 07:59 PM #5
I guess that'd work. I think I'd "glue" the tube in with sillystick and not just seal the ends. I don't really like the idea, but as I can't think of any other options besides dual-glazing ($$$)...
- Andy Mc
-
30th April 2006, 11:02 PM #6
Heavy curtains will help (if you haven't already fitted them).
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
1st May 2006, 09:12 PM #7GOLD MEMBER
- Join Date
- Jan 2006
- Location
- Bowral, NSW, Australia
- Age
- 74
- Posts
- 28
Do you have heating going during the night? If so, what type?
Curtains work for us, but if we use a flueless heater we get lots of condensation.
-
13th May 2006, 03:35 PM #8Senior Member
- Join Date
- Feb 2006
- Location
- Hicksville
- Posts
- 124
Originally Posted by kiwioutdoors
Either replacing the windows, replacing just the glass, or one of the retrofitted cheap double glazing products (often made of plastic).
While replacing the windows in the whole house would be expensive, you might consider it just for the master bedroom (where I presume the problem is worst).
Probably worth trying the retrofit first. A sheet of clear plastic cut to the size of the window and held in place with velcro or similar might tell you if it'll work.
Another idea is solid internal or external shutters especially if they have a core of insulation.
Similar Threads
-
Sealant on Interior WRC window subject to shower spray
By laney_o in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 9Last Post: 13th May 2006, 03:38 PM -
Making window frames
By Wildman in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 7Last Post: 9th May 2005, 12:32 AM -
Cutting a window into an internal brick wall
By dalejw in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 4Last Post: 11th January 2005, 08:00 PM -
New window in an existing brick wall...
By dallas in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 17Last Post: 8th November 2004, 03:02 PM -
window sil in sash window
By glenn k in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 5Last Post: 2nd November 2003, 06:54 PM
Bookmarks