Results 1 to 5 of 5
Thread: Reuse Center
-
11th September 2011, 02:14 PM #1GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 0
Reuse Center
The Nillumbik Shire Coucil operates a reuse shop just up the road from me where I've picked up numerous bargains from pieces of timber to vintage tools, radios and other odds and sods. All items are rescued from tips and landfill and are dirt cheap. The guy that runs the shop makes up a price in his head when you present the items to him. This morning I picked up a very rusty stanley hand plane (no. 3 i think), a Sher power drill saw, a couple of brackets and wait for it... a very dirty 125mm square by 25mm thick lump of myrtle burl !!! When I lumped the lot on his counter he started at my booty and muttered $15. I nearly did a little wee in my pants and quickly forked out the dosh.
So, I'd like to share this place with you. Yan Yean Road, Plenty (Melbourne). Now, my question is, do you know of any reuse centres near you?-Scott
-
11th September 2011, 02:33 PM #2
Have picked up many a bargain at our recycle centre
Bendigo Recycle Shop
Uper California Gully Road
Eaglehawk
-
11th September 2011, 04:43 PM #3Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
-
11th September 2011, 08:38 PM #4Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 77
- Posts
- 0
I pick up stuphph where ever the oportunity presents itself.
At present I have 5 Chairs in need of some work. These will be donated to the Salies or Vinnies.
-
12th September 2011, 02:30 PM #5
Duro Street (from memory) in North Geelong (Vic) has something similar. If you are lucky you may end up with a good score, other times you will walk away with nothing.
They were good for long neck home brew bottles which were $2 for a big box.
Much better to recycle where possible before landfill.Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
Similar Threads
-
Can I reuse brass tacks when reupholstering?
By canado in forum UPHOLSTERYReplies: 1Last Post: 23rd December 2009, 03:00 PM
Bookmarks