Results 1 to 4 of 4

Thread: Varnish?

  1. #1
    Join Date
    Jun 2010
    Location
    Northern Ireland
    Posts
    2

    Default Varnish?

    Hi,

    I have a reclaimed pitch-pine kitchen. It originally came with a waxed finish which looked really nice, but was totally impractical. Everytime there was a splash of water there was a white mark. So, I spent an age removing the wax, sanding the whole thing and then finished it with a matt water-based varnish. This seemed to do the job, but over time it has also allowed marking around handles, staining etc. Now, (after much harassment from my wife) I am about to sand the whole thing down again with my brand new sander. My question is, what should I coat it with that will do the job once and for all? I'd like it to be matt, not change the colour of the wood, but be hard wearing, stainproof etc. Does such a product exist? I'd really like to get it right this time, so any advice from the experts would be really appreciated.

    Thanks very much,
    Steve.

  2. #2
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    U-Beaut's Hard Shellac. I stripped and refinished my hardwood island benchtop with it about 3 months ago. It's still going strong (ok, it's early days yet). I sanded it up to about 240, applied about 6 coats of shellac, cutting back with 300 grit after the 2nd and 4th coats. It's ended up with a slightly rough finish and definitely is matt, not shiny or slippery.

    I reckon it will last for ages now. Cleaning is just a wipe with hot water on a cloth, maybe a bit of detergent from when doing the dishes. I never leave it sitting with water on it, always keep it dry and clean.

    If it does show some wear and tear, then it will be much easier to lightly sand back and apply another couple of coats of hard shellac.

    cheers
    Wendy

  3. #3
    Join Date
    Jun 2010
    Location
    Northern Ireland
    Posts
    2

    Default

    Thanks Wendy, not sure if I can get that here, but I'll look!

  4. #4
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    69
    Posts
    1,133

    Default

    Quote Originally Posted by Custom Homes View Post
    I have a client that wants to build a wine room out of Walnut. Both sheet goods and some solid. She is afraid of the chemicals in the lacquer which we usually use to finish such a product. Will the mill work end up splitting and cracking because it is not sealed? Any help would be appreciated. Are there any other suggestions?
    I suggest a few coats of shellac

    the chemical carrier is alcohol, and alcohol is found in wine
    the solid is, well, shellac, which is a natural product and used for some confectionary
    regards from Alberta, Canada

    ian

Similar Threads

  1. About varnish
    By budgieman in forum FINISHING
    Replies: 12
    Last Post: 11th December 2008, 06:34 PM
  2. Varnish Help!
    By Dennis Millard in forum FINISHING
    Replies: 8
    Last Post: 19th February 2008, 01:17 PM
  3. Best Varnish???
    By ynotTony in forum FINISHING
    Replies: 8
    Last Post: 20th May 2007, 01:55 AM
  4. wax finish on top of varnish
    By Farm boy in forum FINISHING
    Replies: 2
    Last Post: 18th December 2006, 07:16 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •