![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: water saving washers
-
6th September 2009, 01:30 PM #1
water saving washers
I am having troubles with these washers for my shower.
First i put in a 12ltr saver and it made a loud hum or whistle through the pipe when the cold was turned on.
My guess is the noise is the water pushing through the small hole in the washer.
So i put in a 9 ltr in and now i have alot less pressure , noise is still there very slighhtly and the hot seems to fade in and out.
so i have taken it out.
no noise, good pressure but...
I am probably using 30 odd ltrs per minute now. :)(
the shower head is a round flat type.
I have a gas boost, solar panel with storage tank on the ground.
How can i solve this problem?
Read the full thread at RenovateForum.com...
Similar Threads
-
Tap Washers and High Water Pressure
By RedRaven in forum BATHROOM & TOILETReplies: 5Last Post: 16th December 2007, 07:43 PM -
Saving water
By peter_sm in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 1Last Post: 21st September 2007, 08:52 PM -
Water Saving How Serious Are You
By Ashore in forum POLLSReplies: 24Last Post: 18th March 2007, 08:55 PM -
Water saving toilets - weaker toilet flush?
By togaf in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 6Last Post: 6th September 2006, 09:56 AM -
changing tap washers on hot water taps
By jackiew in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 85Last Post: 6th May 2004, 06:43 PM