Results 1 to 7 of 7
-
5th December 2007, 03:25 PM #1New Member
- Join Date
- Dec 2007
- Location
- AUSTRALIA
- Posts
- 2
What Type Of Timber Flooring To Use
Hi i am a real beginner am in the process of building my house the builder i have hired has suggested using tasmanian oak for my floor, however i have heard that this is at the lower end of the market in regards to quality is this true and if so what would be an above average timber floor base to use ??
THANKS
-
5th December 2007, 04:14 PM #2
The bottom of the dung heap is
Chipboard
Plywood
Radiata pine
Meranti
Baltic Pine
Tas Oak is a nice timber that will make a very good floor,
Different hardwood floors can give you different appearances.
-
5th December 2007, 04:19 PM #3
Hi mistado , welcome to the forums, go to this web on tas oak http://www.gunns.com.au/timber/tasoak.html . google any other hardwood to find out its qualities.
Regards
PalLearn from yesterday, live for today, hope for tomorrow. The important thing is not to stop questioning.
Albert Einstein
-
6th December 2007, 10:24 AM #4New Member
- Join Date
- Dec 2007
- Location
- AUSTRALIA
- Posts
- 2
thanks guys, will keep on looking into it
-
6th December 2007, 05:53 PM #5Intermediate Member
- Join Date
- Sep 2007
- Location
- South East QLD
- Posts
- 15
It depends on how you think what a good floor is, Tassy oak or Victorian ash looks bloody beautiful with a warm blonde tone. But it is on the softer side and will dent easily.
Go to a flooring place(or google) borals Janka list(the hardness of each flooring species)
Its cheaper and if you dont have kids running amuck or you will not have hi traffic or HI HEELS, Then it might be ok.
6-7 on the janka scale is not terrible.If trees screamed when we cut them down, we wouldnt. But if they screamed all the time , we would.
-
6th December 2007, 09:44 PM #6
-
11th December 2007, 08:50 AM #7
high heels will leave lots of little dents (reasonably noticable) in Tassie Oak. Have a look at some of the harder timbers ie Grey Iron Bark, Grey Box etc.
I installed Grey Iron Bark and dropped a hammer from the top of a ladder onto the newly laid boards without leaving a dent! Lucky it was being polished the next day!
Pervious people have mentioned janka rating, Grey iron Bark has janka rating of 13, and looks great.
Whatever you decide, check out tradeconnect.com.au as they can source increadibly cheap flooring.
Similar Threads
-
HELP! Identifying type timber
By Baldone in forum FINISHINGReplies: 4Last Post: 2nd December 2007, 02:19 PM -
Old timber flooring - do I really need to sand it?
By Lazy DIY in forum FLOORINGReplies: 3Last Post: 4th January 2007, 04:17 PM -
Timber type for Victorian Era House Floorboards
By vGolfer in forum FLOORINGReplies: 10Last Post: 5th July 2005, 05:24 PM
Bookmarks