Results 1 to 6 of 6
Thread: Painting plastic coated doors
-
3rd April 2017, 10:56 AM #1.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Painting plastic coated doors
My son's family have just moved into a new place and it has those awful lightweight plastic coated woodgrain look internal doors. The finish looks like plastic, is it possible to paint over the top of these and if so does it need any special primer etc.
-
3rd April 2017, 11:02 AM #2
If you are talking about these doors
https://www.bunnings.com.au/corinthi...-door_p2014423
They are not plastic, they are a pressed masonite skin and come from the factory pre-primed.
They ae easy to paint and depending on what type of paint you want to refinish them with you may well not need a primer. Make sure they are thoroughly cleaned with sugar soap and sanded prior to applying the new top coat.
Alternatively you can undercoat them with a good quality water based undercoat followed by your choice of top coat.
-
3rd April 2017, 12:04 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Thanks Fred,
That looks like them except they have a definite yellowish tint to the finish that matches the colour of the door frame. If it's paint it must have been a spray because the wood look grain stands out clearly and theres no paint goop in the recessed corners etc. It could also be the primer has just yellowed with age - i think the house is about 15 years old.
-
3rd April 2017, 05:24 PM #4
my MIL's house has those sort of internal doors. I too thought the outer layer was molded plastic, but I suppose molded masonite would appear the same.
Unfortunately, I can't see how you would sand them as the fake "grain" is 1-2 mm deep. I don't now how you would sand the base of the "grain".
one way to approach the task is to make a set of new internal doorsregards from Alberta, Canada
ian
-
4th April 2017, 09:34 PM #5SENIOR MEMBER
- Join Date
- Apr 2015
- Location
- Brisbane
- Posts
- 65
My house is full of them. I am gradually repainting them. Have been taking off and sanding outside to keep dust out of house. Use a ROS the flat parts then hand sand the rest. Wash with sugar soap. Water based undercoat and gloss. Make sure to paint bottom of door while off. They are not usually painted so bathroom doors usually start to swell at the bottom due to moisture exposure. Not my favourite but too expensive to replace.
Peter
-
4th April 2017, 10:50 PM #6.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
I did a trial paint today and I was really pleased at how well they took the paint.
Similar Threads
-
FRIDGE RACK COATED IN WHITE PLASTIC- damaged plastic exposing wires-- paint? Silicon?
By Reno RSS Feed in forum GENERAL ODDS N SODSReplies: 0Last Post: 10th August 2016, 03:00 AM -
Type of finish for Plastic coated MDF (Melomine)
By Timmy111 in forum FINISHINGReplies: 1Last Post: 11th February 2009, 11:13 PM -
Painting Over Varnished Coated Doors
By Metal Head in forum PAINTINGReplies: 5Last Post: 5th December 2007, 08:46 AM -
Painting a powder coated fence
By Timed Out in forum PAINTINGReplies: 10Last Post: 29th October 2007, 01:55 PM
Bookmarks