![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
-
28th November 2013, 09:30 AM #1
New Member
- Join Date
- Nov 2013
- Location
- Dallas Tx
- Posts
- 1
Howdy Ya'll from a Newbee in Texas
Howdy Ya'll. I'm trying to build a corner base cabinet (triangle shape) for the bathroom. The only ideas I can find make use of doors and I'd like to include a drawer just above the doors. How do I make a trangle shaped drawer that can be pulled out only about 2 thirds of the way and still stay flat and not sag down. I thinking of using a bottom ball bearing slide with something like a trolley on the top of the rear of the drawer. Also what kind of joinery to use to hold the hold drawer together.
I glad to be with you folks and getting new ideas (for me). Inventory of tools: Table saw, Radial Arm saw, Compound mider chop saw, Disk and belt sander, a couple routers (bin and small), Biscuit cutter, bench to drill pressand a bunch of the usual hammers, files, knives, clamps, drills and nailers.
The weather today 11/27/13 = 37 this morning and 40 at 4 pm. What is like in Australia?
-
28th November 2013, 01:23 PM #2
G'Day & Welcome "to the Great South Land" & to a top forum "Ron".
There are quite a few members from Texas & the USA on the forum as well as across the rest of the world..
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [work in progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork.
Cheers from On Top DownUnder, crowie
PS - Fine & Hot as its Summer "downunder" with Sydney CBD in the mid 90's, the western suburbs of Sydney almost 99 & low to mid 90's on the Lower Blue Mountains....
I saw that Texas had snow a week back.....that's not common.... Happy Thanks Giving....
-
28th November 2013, 08:41 PM #3
Howdy and welcome aboard Ron, may your journey with us be a pleasant one. It was 37 degrees here today as well but thats celcius so a bit hooter than where you are.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
29th November 2013, 07:03 PM #4
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum.
-
30th November 2013, 12:54 AM #5
Banned
- Join Date
- Jul 2013
- Location
- Perth
- Posts
- 16
Yup
Warm Welcome to the Texican.
"A Texans idea of "Arms Control" ..... is being able to hit the bulls eye 9 outta 10, with your colt .45 peacemaker!". -Gee Dubya Bush!
"God created all men equal; Samuel E Colt, made some men more equal than others!" -John Wayne!
Triangular drawer eh?
This will be interesting...
Here y'all - hold my beer and watch this, I'll show ya how it's done!
Welcome Aboard...
Weather???
Well..... to be honest, I'm a little worried about the cloud cover........... there isn't any, .........since 1832.
The "downunder texas"... (Wild West Oz).
Ohh and the triangular drawer? If it were me I wouldn't use drawer runners etc I'd hinge it from one corner and have it pivot out!
-
30th November 2013, 03:24 AM #6
welcome to the forum
-
10th December 2013, 03:48 PM #7
Welcome to the forum.
Similar Threads
-
Howdy from Porter,Texas
By vanngo5d in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 7Last Post: 18th December 2012, 05:42 PM -
Howdy, from Texas!!
By Maw-Maw in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 4Last Post: 15th May 2011, 08:29 AM -
Howdy from Texas
By Mister Fixit in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 12th January 2010, 04:34 PM -
Howdy from Texas
By sailormark45 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 8Last Post: 24th July 2009, 03:55 PM -
Howdy, from Texas!
By dnb in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 10Last Post: 13th December 2008, 12:07 AM