Results 1 to 12 of 12
  1. #1
    Join Date
    Apr 2006
    Location
    Brookfield, Brisbane
    Posts
    0

    Default is fiberglass cloth fire proof

    i am building a hot smoker to replce my old nipper kipper.

    plywood box and a seperate smoke box.

    i need a fireproof material to go between the steel fie box and the timber smokehouse.

    i have been told to use fiberglass cloth as i have 50m of 2m wide stuff.

    if it fireproof? will it insulate between teh boxes suficeiently to stop my box catching fire?

    what else might i have around or be able to get easily that will work?

    www.carlweiss.com.au
    Mobile Sawmilling & Logging Service
    8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.

  2. #2
    Join Date
    Oct 2009
    Location
    Springfield NSW
    Age
    71
    Posts
    0

    Default

    I'd take a piece of it and apply a gas torch before using it.

    Fiberglass boats seem to burn pretty fiercly once they get going.

  3. #3
    Join Date
    Sep 2006
    Location
    Avoca Victoria
    Age
    81
    Posts
    7,790

    Default

    G'day Carl,

    Just from experience, I'd separate the two by a length of flue. (can be a foot or so....up to you)
    The Temperature drops a bit, but you get better smoke, and after all you're not cooking, even if it's "hot-smoking"

  4. #4
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    If you throw a bottle in a fire it melts, fibreglass burns even with out resin

  5. #5
    Join Date
    Apr 2005
    Location
    Queensland, Aus
    Age
    72
    Posts
    97

    Default

    Quote Originally Posted by wheelinround View Post
    If you throw a bottle in a fire it melts, fibreglass burns even with out resin
    Whellin' - there's a world of difference between melting and burning.

    The resin in fibre glass is what does the burning, not the glass - it just melts, and it does that at around 2,000 degrees centigrade from memory.

    If the stuff Weisyboy has is truely glass fibre then it's a good insulator - it's been used for years for exactly that purpose

    Ian

  6. #6
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Quote Originally Posted by Ian Smith View Post
    Whellin' - there's a world of difference between melting and burning.

    The resin in fibre glass is what does the burning, not the glass - it just melts, and it does that at around 2,000 degrees centigrade from memory.

    If the stuff Weisyboy has is truely glass fibre then it's a good insulator - it's been used for years for exactly that purpose

    Ian
    Having seen Fibreglass alone burn without resin is why I made the statement it does turn to an ash. You are correct in saying it is a good insulator as we use it these days in homes for insulation. There is also proof fires have started in this type of Fibreglass just through heat transfer from down lights no resin in sight.

  7. #7
    Join Date
    Apr 2005
    Location
    Queensland, Aus
    Age
    72
    Posts
    97

    Default

    Quote Originally Posted by wheelinround View Post
    Having seen Fibreglass alone burn without resin .
    Then it wasn't fibreglass!!

    Just went down the shed and put a gas torch to some stuff I know is fibreglass mat
    The stuff doesn't burn it just gets hot to the point of white heat and crumbles to a grey powder which I think is what glass does if it's cooled too quickly. It does not continue to do this the moment the flame is removed from it so, in my book, it doesn't burn.

    Glass is pure silica and that stuff neither burns nor supports burning - when was last time you set a beach alight?

  8. #8
    Join Date
    Sep 2006
    Location
    Avoca Victoria
    Age
    81
    Posts
    7,790

    Default

    Quote Originally Posted by Ian Smith View Post
    - when was last time you set a beach alight?
    1959...but that was just Rock 'n Roll.

  9. #9
    Join Date
    Apr 2005
    Location
    Queensland, Aus
    Age
    72
    Posts
    97

    Default

    Quote Originally Posted by watson View Post
    1959...but that was just Rock 'n Roll.

  10. #10
    Join Date
    Apr 2006
    Location
    Brookfield, Brisbane
    Posts
    0

    Default

    what i have is a roll of glass fiber cloth we used it to do the boat and have a lot left over.

    tried it and it dosent burn it will turn to ash if you get it hot enough i had to use the oxy to get it that hot thow. lpg alone would not do it.

    thanks for teh help guys.

    shoulda just gone out and tested it myself in teh first place.

    but it was raining and i would have melted.

    the smoker will be heated by a metho burner so it wont get anyware near hot enough to burn the glas sheet.

    ill put plenty of layers so teh heat dosent get threw into teh ply.

    www.carlweiss.com.au
    Mobile Sawmilling & Logging Service
    8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.

  11. #11
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    0

    Default

    Remember what they pack in a automotive muffler...
    ....................................................................

  12. #12
    Join Date
    Sep 2008
    Location
    Coffs Harbour
    Posts
    22

    Default

    Plus welding & fire blankets
    regards inter

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •