Results 1 to 7 of 7
  1. #1
    Join Date
    Aug 2006
    Location
    Brisbane
    Posts
    3

    Default Silver Batts & Remote Garage Doors

    Hi All.

    Have been following the insulation posts with some interest for a while now and as I'm about to embark on my own reno that of course involves insulating the ceiling thus have a question to ask.

    Does anyone know if using silver batts interferes with the RF frequencies used in the operation of auto garage doors ?

    I'm not technically minded when it comes to RF frequencies and interferences etc but it would be a shame to install these bad boys only to have it stop the garage door from opening.

    I've asked a few sales guys and they seem a bit cagey on the reply.

    Any help / comments welcome.

  2. #2
    Join Date
    Jun 2005
    Location
    Sydney
    Posts
    313

    Default

    is it a rf remote or infra red?
    where will the antenna be if its an rf remote?
    will there be an antenna on the inside as well as the outside of the carport?
    if the silver batts are on the ceiling only, what are the sides and door of the carport made from and what insulation will there be?
    Is there a window that the antenna can be mounted near?
    Cheers,
    Clinton

    "Use your third eye" - Watson

    http://www.flickr.com/photos/clinton_findlay/

  3. #3
    Join Date
    Aug 2006
    Location
    Brisbane
    Posts
    3

    Default

    Lowset brick house, double garage, singe window to one side, internal wall on the other.

    B&D Controlla Door 4 to be specific with controller using the 433 Mhz range. Standard install with controller/reciever ceiling mounted beneath the drive unit. No external arial but does use internal coax as antenna.

    <edit> Silver batts are for ceiling install only thus directly over the entire unit. </edit>

  4. #4
    Join Date
    Jun 2005
    Location
    Sydney
    Posts
    313

    Default

    If the only change is to put the foil in the ceiling, it won't worry it. ie. if it will work now, then it won't change.

    If you mounted the coax antenna above the foil it may affect it - seems this isn't an issue.
    Cheers,
    Clinton

    "Use your third eye" - Watson

    http://www.flickr.com/photos/clinton_findlay/

  5. #5
    Join Date
    Jul 2003
    Location
    Mt Druitt NSW
    Age
    65
    Posts
    139

    Default

    We've just had a new extension and there is silver one side sarking fitted in the walls and under the tile battens. This hasn't stopped the portable or mobile phones nor the radio part of our stero system from operating inside the house.

    Maybe the sales staff were cagey because they just didn't have a clue.
    ______________
    Mark
    They only call it a rort if they're not in on it

  6. #6
    Join Date
    Aug 2004
    Location
    Melbourne
    Age
    52
    Posts
    121

    Default

    Our cordless phone still works after installing double silver pleated batts + double sided sarking in walls and top hat silver batts in ceiling.

    Dont see why it you door opener would not also work!

  7. #7
    Join Date
    Aug 2006
    Location
    Brisbane
    Posts
    3

    Default

    Thanks for your input guys.

Similar Threads

  1. Faulty remote controlled garage door
    By alisonol in forum THE GARDEN SHED
    Replies: 5
    Last Post: 7th July 2006, 07:51 PM
  2. Hi Ho Silver
    By Bluegum in forum JOKES
    Replies: 2
    Last Post: 4th October 2005, 05:57 PM
  3. How to do reliable silver soldering
    By Arron in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 11
    Last Post: 23rd May 2005, 11:19 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •