Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9

Thread: Tung Oil

  1. #1
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default Tung Oil

    If I wanted to thin out 100 percent Tung Oil would are the options available.

    I did get an answer from someone but as it turned out I forgot what he said. I guess when he see's this post he might reply and so it is written,

    Then is makes it a little harder to forget.

  2. #2
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    You can use Mineral Turps, White Spirits or even Turpentine (the real thing) to thin Tung Oil (also known as China Wood Oil)

  3. #3
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Orange oil, for a nicer smelling solvent.

  4. #4
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    0

    Default

    Personally, I'd stick with White Spirits. (aka Shellite)
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  5. #5
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Quote Originally Posted by Skew ChiDAMN!! View Post
    Personally, I'd stick with White Spirits. (aka Shellite)
    Shellite is a different solvent to White Spirits, try using your Zippo lighter with White Spirits

  6. #6
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    What about Citrus Terpene?

  7. #7
    Join Date
    Sep 2010
    Location
    Sydney
    Posts
    0

    Default

    I use boiled linseed oil and gum turpentine, then adding some poly afterwards to add some toughness to the surface.

  8. #8
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    0

    Default

    Does all this sound familiar you thick headed bvgger. Fletty and I said turps and a bit of Terebine to speed up the drying time or as some of the above have said I also make a Danish with 33%tung,33% blo and 33%polyurethane (Sam Maloof mix) Or sometimes I will just mix some blo in 50/50 as the blo is cheap like turps and spins it out further. So you did buy it then?
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

  9. #9
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Quote Originally Posted by Claw Hama View Post
    Does all this sound familiar you thick headed bvgger. Fletty and I said turps and a bit of Terebine to speed up the drying time or as some of the above have said I also make a Danish with 33%tung,33% blo and 33%polyurethane (Sam Maloof mix) Or sometimes I will just mix some blo in 50/50 as the blo is cheap like turps and spins it out further. So you did buy it then?
    I am a little slow in responding as I had twice now forgotten to add email notification.
    Yes I did purchase it.

    Some background,
    This was at the Sydney Working With Wood Show, it was Fletty and Claw Hama turn at the forum stand. So I went and asked a question of the forum. They gave me the answer but alas I forgot when I noticed .... So I posted a question (no such thing as a silly question even if I ask it more then once).

    And it did get written and a couple more options. Now I just need to experiment. Maybe I should have purchased the 25 liters.

    I think I might need to start saving from now for the next years Sydney show.

Similar Threads

  1. When Tung Oil isn't tung oil
    By jmk89 in forum FINISHING
    Replies: 5
    Last Post: 20th November 2008, 05:49 PM
  2. Tung Oil
    By mat in forum FINISHING
    Replies: 9
    Last Post: 25th May 2008, 03:33 PM
  3. tung oil ???
    By la Huerta in forum FINISHING
    Replies: 20
    Last Post: 4th November 2005, 10:05 PM
  4. Where to buy Tung Oil in BNE?
    By FlyingDuck in forum FINISHING
    Replies: 10
    Last Post: 10th July 2005, 11:46 PM
  5. Tung Oil available from....?
    By Angelika in forum FINISHING
    Replies: 2
    Last Post: 22nd July 1999, 11:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •