Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Torque Workcentre Router Master
-
26th May 2014, 12:37 AM #1
Torque Workcentre Router Master
You don’t see one of these for sale every day!
This is an Australian invented and manufactured overhead routing system (it can also mount a circular saw, drill, ROS, chainsaw etc with the correct accessories)
A brilliant system – I still have a big version with a 2.5m bed. This one doesn’t have the X axis travel (although there are ways around that!), and is primarily designed as a router platform (thus the name).
Has a standard router mount included (posts need a bit of a clean – surface rust), blade guard, copy pin (again, needs a clean). I have also included a dust guard (part has broken off, will need regluing, and will need mounting pins, but it is free, and not the normal $115!)
600mm arm, plunge system with X, Y and Z axis rotation, and Y and Z axis axial movement. These normally retail for $2000. Reserve of $1000"Clear, Ease Springs"
www.Stu's Shed.com
-
27th May 2014, 12:14 AM #2Member
- Join Date
- Jan 2011
- Location
- Melbourne
- Posts
- 72
PM sent
-
3rd June 2014, 10:21 PM #3
Sorry all - just discovered a couple of PMs - must have switched off email notification
Have replied to the PMs. Viewing is welcome as required."Clear, Ease Springs"
www.Stu's Shed.com