Results 1 to 10 of 10
  1. #1
    Join Date
    Oct 2011
    Location
    South Dakota
    Posts
    15

    Default Mirror Finish - Which varnish should I use? (etc)

    Varnish, lacquer - whatever... What product should I use, that isn't super expensive, to get a mirror finish on my latex-painted box?

    Also, I read on a forum that Polyurethane isn't great for a mirror finish. They suggested Rockhard, but that product only has one review. I'm afraid to try it.

    http://www.sawmillcreek.org/showthread.php?117177-In-Desperate-Need-Of-Help-On-Polyurethane-Mirror-Finish!

    (I am USA, if it matters.)

    Thanks.

  2. #2
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    Minwax Wipe on Poly (Gloss) should fit the bill. Here's one I prepared earlier.
    Attached Images Attached Images

  3. #3
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Is the existing paint a mirror finish? If not, you've got some sanding to do, otherwise the first umpteen coats of varnish will be filling imperfections in the paint finish before you start building your varnish layer.

    Make sure that whatever finish you use is compatible with the paint; putting on a high solvent finish such as acrylic lacquer could cause lifting or bubbling of the paint.

    Whatever finish you use, the secret is in sanding; with my favourite film-forming coating (acrylic lacquer for cars) that means sanding to 2000 grit then using a buffing compound for the final gloss shine.

  4. #4
    Join Date
    Oct 2011
    Location
    South Dakota
    Posts
    15

    Default

    That's too diffuse. I want something like this:
    http://www.hometheatershack.com/foru...d-dscn0188.jpg

    Thanks!

    Quote Originally Posted by LGS View Post
    Minwax Wipe on Poly (Gloss) should fit the bill. Here's one I prepared earlier.

  5. #5
    Join Date
    Oct 2011
    Location
    South Dakota
    Posts
    15

    Default

    Not yet, I just put on my 4th coat of paint. It's too thin to sand, I think I need 2 or 3 more.
    Then, I have sandpaper all the way down to 2k.

    Quote Originally Posted by Master Splinter View Post
    Is the existing paint a mirror finish? If not, you've got some sanding to do, otherwise the first umpteen coats of varnish will be filling imperfections in the paint finish before you start building your varnish layer.

    Make sure that whatever finish you use is compatible with the paint; putting on a high solvent finish such as acrylic lacquer could cause lifting or bubbling of the paint.

    Whatever finish you use, the secret is in sanding; with my favourite film-forming coating (acrylic lacquer for cars) that means sanding to 2000 grit then using a buffing compound for the final gloss shine.

  6. #6
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    0

    Default

    If your "latex" paint is the same thing as what a lot of people call water-based "acrylic", here's a possibility:
    Liquitex Artist's Acrylic Gloss Varnish. Most art stores will have it. 8 oz bottle.
    Milky looking going on but sets up clear and _very_ shiny.
    I use a lot of it over raw western red cedar and/or other surfaces of wood carvings that have been painted with artists' acrylics.
    First coat looks just kind of sort of OK. Second coat is the real surprise = done.

  7. #7
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Yer. If 'latex' = 'water based, slap it on your walls or skirtings' paint, I'd give it a good sanding...all the way to bare timber, then start again using an automotive paint system.

  8. #8
    Join Date
    Feb 2012
    Location
    Nowra, NSW, Australia
    Age
    66
    Posts
    0

    Default

    I'd go with LGS's suggestion of MinWax Wipe-on Poly, multiple coats rubbed with 1200G between coats, then after the last coat rub with consecutively finer paper to the gloss you're after.
    As mentioned by Master Splinter, the secret is in the sanding.

    For super-fine grits, Google 'Micro-Mesh'. It comes in consecutively finer grits up to 12000G and is capable of taking a surface to about the same gloss as clear acrylic sheet.
    See here: Micro-Mesh NC-78-1 Acrylic Restoral Kit | The Sandpaper Man

    Otherwise, go to 2000G+ then apply a coat of wax and buff.
    ... Steve

    -- Monkey see, monkey do --

  9. #9
    Join Date
    Sep 2012
    Location
    Sydney
    Posts
    0

    Default

    I second the micro mesh recommendation this stuff is awesome, Also worth a try is 3M Trizact I have some of these in 1500,3000,5000 & they produce an awesome finish, I would say better than a mirror finish!

  10. #10
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Or once you get to 1500, switch to automotive buffing compound - this is designed to break down into finer grits in use, so it effectively provides 1500 + grits in the one application.

    The biggest secret is having a paint that is designed to be compounded this way - it needs a hard finish so it can be smoothed out/worn flat.

Similar Threads

  1. Protecting an Oil/Varnish Finish
    By Morbius in forum FINISHING
    Replies: 0
    Last Post: 28th December 2012, 06:46 AM
  2. HELP!!!!! I Need a Mirror Like Finish
    By johnlimburg in forum FINISHING
    Replies: 12
    Last Post: 14th July 2010, 12:27 PM
  3. wax finish on top of varnish
    By Farm boy in forum FINISHING
    Replies: 2
    Last Post: 18th December 2006, 07:16 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •