![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
-
18th November 2007, 09:58 PM #1
New Member
- Join Date
- Nov 2007
- Location
- mooroopna
- Posts
- 2
Electrical safety switches on the main box
G'day there,
Just wondering if anyone knows roughly how much it will cost to install electrical safety switches on the main box.
Cheers
-
18th November 2007, 10:27 PM #2
How long is a piece of string
There are a lot of variables
I suggest get a sparkie in to quoteElectricity:
One Flash and you're ASH
-
18th November 2007, 10:36 PM #3
We had one done at home for a few hundred and one at work including three phase for $3.5K. A lot of variables as said so I would get an electrician around for that quote and expect a figure of under $1,000, if everything else is up to par.
-
18th November 2007, 11:25 PM #4
Electrician
- Join Date
- Sep 2007
- Location
- Thailand
- Age
- 63
- Posts
- 90
There are 4 types of RCD's available in Australia. Please see the attached pic.
My choice would be (b) because it will protect against half wave faults as could be the case with hair dryers in bathrooms.“I do not think there is any thrill that can go through the human heart like that felt by the inventor as he sees some creation of the brain unfolding to success... Such emotions make a man forget food, sleep, friends, love, everything.” - Nikola Tesla.
-
19th November 2007, 07:30 PM #5
Senior Member
- Join Date
- Dec 2006
- Location
- Outer East - Melbourne
- Posts
- 265
Along with everything else we had to get done to have a safety switch installed, as there are regulations to be followed when new stuff is added, we had added $2500 to our house .
Similar Threads
-
Installing cooktop - do I need an electrician - and if so why?
By Geno in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 111Last Post: 14th April 2007, 11:28 AM