![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: lathe accuracy
-
14th May 2024, 05:11 PM #1
Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
lathe accuracy
with a 1inch bar x 4 inch length of cut at 0.0001 doc unsupported ( not using tailstock)
what sort of accuracy should one expect on an AL960...including a non adjusted spring cut?
Read the full thread at metalworkforums.com...