Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2004
    Location
    Eastern Suburbs Melbourne
    Posts
    0

    Default Levelling a bathroom

    Started on my sister's bathroom yesterday. There are floorboards which were cupped slightly, but I did my best to flatten them with belt sander and plane. One corner though is a little low as a result of restumping. I would say about 4 to 7 mm. How does one level (or go close to level) the bathroom without taking off all the floor boards and starting over again. Would you worry about the height that it's out or use more adhesive (in the low corner to raise the height) as she will be putting tiles over the fibre cement when I put it down?

  2. #2
    Join Date
    Sep 2006
    Location
    Behind that little door under the thicknesser...
    Posts
    44

    Default

    put the tile underlay down, then water proof then use leveling mud (or is it the other way around?) then glue down the tiles....
    Ours is not to reason why.....only to point and giggle.

  3. #3
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    311

    Default

    Pretty much what he said.
    If you dont play it, it's not an instrument!

Similar Threads

  1. Bathroom Renovation Project
    By juan in forum BATHROOM & TOILET
    Replies: 152
    Last Post: 3rd May 2008, 04:58 PM
  2. Small bathroom renovation almost complete
    By sco in forum BATHROOM & TOILET
    Replies: 5
    Last Post: 7th April 2007, 10:18 PM
  3. Complete Bathroom in a Day
    By batcat in forum BATHROOM & TOILET
    Replies: 3
    Last Post: 31st January 2007, 12:41 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •