Results 1 to 6 of 6
  1. #1
    Join Date
    Aug 2007
    Location
    VIC
    Posts
    3

    Question to Lay a Concrete slab?

    what should I do to prepare to get a Slab of concrete layed for a new garage?

    plan is a 2 car garage in the backyard....
    -should i dig the area out 5inches deep
    -go and Lay the REO bars myself
    then call a concrete truck

    or do you think i will need a permit of some sort as well?

  2. #2
    Join Date
    Jun 2006
    Location
    Barboursville, Virginia USA
    Age
    77
    Posts
    549

    Default

    I will be absolutely amazed if you don't need a permit before you pour anything for a garage. Drainage, water run-off, set back lines, etc. etc.
    Cheers,

    Bob



  3. #3
    Join Date
    Sep 2005
    Location
    Leithfield, New Zealand
    Posts
    0

    Default

    I reckon you can pour the slab. But the trouble might start when you start putting up walls....... So better get the permit first (that's what you'd need to do here in the land of the flightless bird).
    1st in Woodwork (1961)

  4. #4
    Join Date
    Jul 2004
    Location
    Sale
    Age
    69
    Posts
    559

    Default

    If its for a garage you will need a permit, as you are going to need one for the structure anyway it would be a shame to pour one only to be told later to remove it. Generally the slab needs to be inspected after placement of reo etc but before the pour.

  5. #5
    Join Date
    Aug 2007
    Location
    Silverdale
    Age
    67
    Posts
    0

    Default

    if it's going to have a garage on it, depending on the type of construction you use, you will require some kind of footings/dropped edge beam, etc to support the weight. You might be jumping the gun a bit. I'd get the plans of the shed sorted first, these will dictate your requirements re slab, then get the whole lot approved.
    __________________________________________
    A closed mouth gathers no feet. Anon 2009

  6. #6
    Join Date
    Oct 2003
    Location
    Kentucky NSW near Tamworth, Australia
    Age
    86
    Posts
    1,067

    Default

    Not only the above requirements you are probably going to need a engineers recommendation for your council.

    If you are going to put up a kit garage you will find that the suppliers of garages will supply all these things for you.

Similar Threads

  1. Paving with bricks over concrete slab
    By Chumley in forum CONCRETING
    Replies: 14
    Last Post: 20th July 2007, 09:44 AM
  2. Concrete Slab Insulation
    By dallas in forum CONCRETING
    Replies: 10
    Last Post: 11th June 2007, 07:05 PM
  3. Concrete Slab Curing Question
    By Moe Z in forum CONCRETING
    Replies: 10
    Last Post: 1st November 2006, 05:04 PM
  4. Grinding a concrete slab
    By vGolfer in forum CONCRETING
    Replies: 19
    Last Post: 25th August 2005, 11:08 PM
  5. Extending a concrete slab
    By princhester in forum CONCRETING
    Replies: 8
    Last Post: 24th July 2005, 08:49 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •