Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 15 of 15
  1. #1
    Join Date
    Mar 2006
    Location
    Geelong
    Age
    42
    Posts
    16

    Default Grad show photos

    Well after three years I have finally finished my degree and I thought I would post some photos of the installation of our graduate show. It opens on thursday night and while I'm not expecting to sell any sculptures I think a few of the prints will go. I also realise the photos look appalling but I'll take the time to shoot better ones later.
    Just for scale, the columns (or shrines as I call them) are 2m tall and the prints on the wall are 1600mm long.
    Cheers
    Josh

    p.s. I am looking forward to getting back to doing some work that's just for me!

  2. #2
    Join Date
    May 1999
    Location
    Grovedale, Victoria Australia
    Age
    66
    Posts
    567

    Default

    Looks Great Josh.

    We are looking forward to seeing it in the flesh.
    Jim Carroll
    One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
    Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!

  3. #3
    Join Date
    Mar 2006
    Location
    Geelong
    Age
    42
    Posts
    16

    Default

    Thanks Jim!

  4. #4
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    694

    Thumbs up

    Great work Josh.

    I see we are right into some prickly subjects.

  5. #5
    Join Date
    Jun 2003
    Location
    queensland
    Age
    78
    Posts
    0

    Default

    Congratulations Josh. 3 years work,that is a great achievement.

    Terry

  6. #6
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    1,993

    Default

    Where is it?
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  7. #7
    Join Date
    Mar 2006
    Location
    Geelong
    Age
    42
    Posts
    16

    Default

    It's at the Gordon TAFE basement studios. I've attached a copy of the invite with all the details.

    Josh (or BJ on the invite)

  8. #8
    Join Date
    Mar 2007
    Location
    nth coast nsw
    Posts
    1,139

    Default

    congrats Josh, well done, great looking show
    now you're going to have to change your forum name, can't see any turning there at all

    what if the hokey pokey is really what it's all about?

  9. #9
    Join Date
    Mar 2006
    Location
    Geelong
    Age
    42
    Posts
    16

    Default

    Thanks guys!


    Quote Originally Posted by underfoot View Post
    congrats Josh, well done, great looking show
    now you're going to have to change your forum name, can't see any turning there at all
    Well... if I'm completely honest I did rough out the shell on the lathe
    I do actually like using the lathe to get things into shape and while my previous idea of carving was more like embellishing turned forms, I have some plans to turn that all around (no pun intended). So I'll wait to see how these pan out before doing anything drastic.
    Cheers
    Josh

  10. #10
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    1,993

    Default

    Bugger .... I would have liked to have checked it out but 12pm-6pm weekdays is no good unfortunately.
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  11. #11
    Join Date
    Mar 2006
    Location
    Geelong
    Age
    42
    Posts
    16

    Default

    Quote Originally Posted by Sir Stinkalot View Post
    Bugger .... I would have liked to have checked it out but 12pm-6pm weekdays is no good unfortunately.
    Unfortunately we don't get weekend access but we can open up almost any other time during the week, so if you'd like to come in at another time let me know.

    Josh

  12. #12
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    1,993

    Default

    Thanks for the offer Josh ..... I will try and make it tomorrow night depending on when I finish work and what the traffic is like. Is it open to the public tomorrow?
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  13. #13
    Join Date
    Mar 2006
    Location
    Geelong
    Age
    42
    Posts
    16

    Default

    Quote Originally Posted by Sir Stinkalot View Post
    Is it open to the public tomorrow?
    Absolutely!

  14. #14
    Join Date
    May 1999
    Location
    Grovedale, Victoria Australia
    Age
    66
    Posts
    567

    Default

    Went along last night to see the work on display.

    There is Josh or is it BJ now and 3 other students displaying their work.

    All very good in their own feilds.

    Small display but worth the look.

    Now we look forward to when Josh can exhibit in his own right.
    Jim Carroll
    One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
    Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!

  15. #15
    Join Date
    Mar 2006
    Location
    Geelong
    Age
    42
    Posts
    16

    Default

    Thanks Jim, but it will be a very long time before I want to do anything like that again! ;-)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •