Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2012
    Location
    Australia
    Posts
    3

    Default Applying vinyl sticker to wood?

    Hi guys,

    I'm looking to make a desk out of mdf that I already have (I will be bracing the underside to prevent sag as much as possible), but anyway, as I don't want the desk to look like an mdf one, I want to cover it with something.. I was originally thinking of using some wood vinyl, however I'm finding it hard to find anything like what I could use on ebay.. I then also thought about using carbon fiber 3d film (please don't hate me for it).. I think it'll look cool, but I'm not sure how the best way to apply it to the wood would be..

    Could I please have some tips? As in, what sort of finishing would I have to do to the mdf first, before trying to apply the vinyl sticker.. For reference, I'm looking at this item on ebay, to use as the desk-top covering eBay Australia: Buy new & used fashion, electronics & home d

    I'm already set on using the mdf because I don't have to purchase it. Ideally I would use plywood, but for now I want to save as much cost as I can.

    Thanks.

  2. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Ummm... it's self adhesive...however I don't think it would be a very durable surface in a tabletop application. Pre-application I'd just wipe the MDF with a rag with some wax and grease solvent then hit it with the air compressor to de-dust and evaporate any leftover solvent.

    Buy some real carbon fibre and epoxy - Carbon Fibre Cloth 3K 2X2 Twill Weave 1000mm X 1000mm REAL CF Not Plastic | eBay - and use that!!!

  3. #3
    Join Date
    Oct 2012
    Location
    Australia
    Posts
    3

    Default

    Thanks for the reply mate.

    I was aware it was self adhesive, but I wasn't sure how it would go sticking to the mdf, without first putting something on it.

    It would be cool to use real carbon fibre, but I'm making a big desk (2000mm x 800mm), so it would prove to be rather expensive to cover it that way.

    However, I didn't even think of how much ware it would take :/, bit silly of me.. However, for a cheap desk it wouldn't be too bad for now.. I just need something to do until I make something more permanent and from decent materials.

  4. #4
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Cheap option and reasonably durable option - go to Clarke Rubber or similar, buy some upholstery vinyl, throw it over, stretch tight and staple it on the underside. Or just slap some clear polyurethane floor varnish over it. If possible round off the edges for a more 'elegant' (if any mdf can ever be described as elegant) look.

  5. #5
    Join Date
    Oct 2012
    Location
    Australia
    Posts
    3

    Default

    Thanks again mate, I didn't even think of Clark Rubber

Similar Threads

  1. Applying teak oil (watco) over wood stain.
    By Fricasseekid in forum FINISHING
    Replies: 6
    Last Post: 31st July 2012, 09:24 PM
  2. bumper sticker
    By weisyboy in forum JOKES
    Replies: 4
    Last Post: 5th August 2007, 07:54 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •