Thanks: 0
Likes: 1
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: UK Backsaw Sharpening WIP
-
16th April 2013, 01:46 PM #1
UK Backsaw Sharpening WIP
Andy here has *many* pages ... this is pages 12+13 ...
Saw Talk #12: You win some, you lose some - by Brit @ LumberJocks.com ~ woodworking community
-
16th April 2013, 04:02 PM #2
Well I can get teeth like that. I'll be waiting for the next bit to see what he does to fix it.
Regards
John
-
16th April 2013, 11:39 PM #3
At the top of the page you can go forward as far as #24 or back to #1
This one's kinda familiar .... Saw Talk #19: It
-
17th April 2013, 12:48 AM #4
Finally summary ... Saw Talk #25: So what have I learnt and has it all been worth it? - by Brit @ LumberJocks.com ~ woodworking community
He comes to the same conclusion that occurred to me ... that we shouldn't be suggesting sharpening a saw is a different level of difficult to chisels and plane irons.
They can all be done somewhere in between OK and amazing, ... and result in performance somewhere in between OK and amazing, ... assisted by technique that needs to be learnt/observed/understood/practised.
Cheers,
Paul
-
17th April 2013, 11:01 AM #5
Well I had a look and think I will have another crack at getting teeth more even than I have been. There is plenty good stuff on the other episodes like taking a kink out of a blade and getting the back off and on. Plenty of info for the L plate saw doctor.
Regards
John
-
17th April 2013, 01:14 PM #6
I'm not 100% sure about the 'hit it with a stick' straightening protocol ...
you might get IanW to weigh in on that one ...
Cheers,
Paul