![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 12 of 12
-
9th January 2024, 07:46 AM #1
New Member
- Join Date
- Jun 2023
- Location
- Sydney, NSW
- Age
- 71
- Posts
- 9
Joining sewer terracotta to PVC Plumbquick
All, about 15 years ago I replaced all the external terracotta sewerage line with PVC. Months of excavation, a day for the plumber, lucky him.
The PVC is joined to terracotta at the slab boundary with a plumbquick. It now has roots in it as I didn't concrete the junction as it appears I should have.
What's the best and most permanent solution for sealing the plumbquick? Concrete? Concrete plus sealant? Something else?
Not looking forward to the excavation, but that's a different moan.
Cheers
-
9th January 2024, 08:37 AM #2
GOLD MEMBER
- Join Date
- Apr 2018
- Location
- Nsw
- Age
- 64
- Posts
- 558
-
9th January 2024, 08:57 AM #3
Senior Member
- Join Date
- May 2023
- Location
- Maroochydore
- Age
- 76
- Posts
- 116
Roots get through concrete as well.
Best bet is run plumbers and roofers silicone around the pipe before fitting the plumbquik fitting.
And make sure the clamp is tight.
I found it always paid to go back 30 minutes later for a nip up of the clamp.
Once you have made the repair kill off/poison the tree roots.
-
9th January 2024, 10:05 AM #4
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
So my current Plumber tells me plumqwik's only last 5-10 years so you have done well, after that they break down and the roots grow though them, I have the same problem only mine is all PVC (was used to fix a break)
if you can, remove it and use a PVC joiner and Silicone on the Terracotta.
-
9th January 2024, 11:07 AM #5
Senior Member
- Join Date
- May 2023
- Location
- Maroochydore
- Age
- 76
- Posts
- 116
-
9th January 2024, 11:18 AM #6
Intermediate Member
- Join Date
- Jun 2010
- Location
- SW Victoria
- Posts
- 49
If you decide on concrete as extra insurance, add BondCrete to the water and an extra 20% cement to the mix, all to make it extra water tight
-
9th January 2024, 11:24 AM #7
GOLD MEMBER
- Join Date
- Apr 2018
- Location
- Nsw
- Age
- 64
- Posts
- 558
I would question whether that information is correct, It may well be but never heard it before, they are approved for use so doesn’t sound right that they would have such a short lifespan. Also they use rubber rings with drainage pipes and they last indefinitely so would expect the same of the coupling
-
9th January 2024, 11:34 AM #8
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
I am not a Plumber, can only go on what I was told and the fact the one that was installed 10 years ago when excavated has simply fallen to pieces.
-
9th January 2024, 12:47 PM #9
GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 287
According to the Fernco website, PlumbQuik fittings are for above-ground drainage applications.
PlumbQwik™ (PVC Couplings) - Fernco
But then some retailers are advertising them as being suitable for both above- and below-ground use. So who knows? I agree with beardy- a 10 year lifespan for a below-ground fitting is pathetic assuming they are approved for that application.
-
9th January 2024, 01:30 PM #10
GOLD MEMBER
- Join Date
- Apr 2018
- Location
- Nsw
- Age
- 64
- Posts
- 558
According to their website they do above ground ones and then others specifically designed for in ground. The ones you buy off the shelf at Bunnings etc are above ground only I suspect
-
9th January 2024, 09:45 PM #11
Senior Member
- Join Date
- Jun 2013
- Location
- Geelong
- Posts
- 87
Back in the 80’s we used these
IMG_2359.jpeg
Joined with a fat oring the earthen ware pipes used. PVC glue on the pvc end of course. Those rubber rings on the earthen ware pipes either let the roots in or they didn’t, I suspect it was probably more to do with ground movement the type of tree and the amount of watering or lack of watering causing tree roots to search for moisture. Never used a rubber coupling with a steel hose clamp underground. Don’t think our inspector would pass that.
,cheers,
-
10th January 2024, 06:34 AM #12
New Member
- Join Date
- Jun 2023
- Location
- Sydney, NSW
- Age
- 71
- Posts
- 9
Thanks Gents
Interesting that this question stirred up some divergent views etc. I think I'll contact Fermco and see what they say, will report back. If 10 years or so is all you can expect, it's hardly a product for use underground, with or without concrete, silicone and tape!
Similar Threads
-
Cutting terracotta tiles
By wallyk in forum TILINGReplies: 3Last Post: 6th February 2008, 05:16 PM -
Carpeting over terracotta tiles?
By sfd in forum TILINGReplies: 2Last Post: 12th October 2007, 06:22 PM -
Cleaning Terracotta pavers
By Glenn S in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etcReplies: 3Last Post: 31st May 2005, 08:19 AM -
Cleaning Terracotta Roof Tiles
By John99 in forum TILINGReplies: 13Last Post: 8th December 2004, 07:39 PM