Alarm Piezo

[seacrest]

I have installed a new bosch alarm every thing is working well
except for the piezo screamer it is connected from N/O to ground
I tested it on a 12 v battery and worked ok
The wiring diagram has wired pir's of it but i am using wireless
i don't think this is the problem
please view wiring diagram http://www.boschsecurity.com.mx/_arc...ef_0506_en.pdf
Can i use another circuit like the siren?

[NCArcher]

Seacrest,
Check that link (No 7 on the drawing) is installed between 12V and COMM. This is what directs the internal 12V supply to the COMM terminal and then to the N/O when activated.

[seacrest]

Thankyou, that did the trick