Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3

Thread: decking queries

  1. #1
    Join Date
    Mar 2004
    Location
    Victoria
    Posts
    43

    Default decking queries

    Hi.

    When using the 3 4 5 method to get a right angle do you do it both corners ( ie left and right) or just one corner

    When you have done the above you have to square the string lines diagonally, do you move the string line both sides to make it square or only one side ( ie assuming it is 3 mtrs on one diagonal then 3.1 on the other do you move one side 50mm then the other side 50mm) or just simply move one side the 100mm.

    Are 100x100 red gum stumps OK to sink in the ground.

    Thank you

  2. #2
    Join Date
    Nov 2003
    Location
    Beachport, South Oz, the best little town on the planet.
    Age
    73
    Posts
    776

    Default

    3,4,5 one corner and then measure everything from there, if you start square and are then accurate with your measuring then you will finish square.
    Redgum stumps in ground are OK in some areas but I would not chance it.

  3. #3
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    This is convoluted so I apologise but ......

    I noted on one of the many American shows that they don't cement posts into the ground even when building fences .... they dig the hole around 20cms deeper than required then tamp in a gravel base - add the post - then fill around with more gravel, well tamped too..... this may have a lot to do with ice etc. but after seeing it, it seemed to make a lot of sense..... perhaps this approach might work for stumps as well....?

    Anyway, I feel strongly that Redgum or any other timber is unsuitable for stumping..... concrete is the go as it can't rot and bugs don't eat it.

    just my .002c

    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •