Results 1 to 8 of 8
  1. #1
    Join Date
    May 2006
    Location
    Perth
    Posts
    4

    Default Noisy suspended timber flooring

    What is the best way to eliminate the noise of feet walking above you with a new suspended timber floor? Typically structafloor on joists @ 450 centres.
    Will it blow the budget?

  2. #2
    Join Date
    May 2005
    Location
    Newcastle
    Age
    73
    Posts
    1,064

    Default

    Depends on how big the budget is
    Ashore




    The trouble with life is there's no background music.

  3. #3
    Join Date
    Sep 2004
    Location
    Strzelecki Ranges Victoria
    Posts
    395

    Default

    100mm SonoBatts
    Peter Clarkson

    www.ausdesign.com.au

    This information is intended to provide general information only.
    It does not purport to be a comprehensive advice.

  4. #4
    Join Date
    Mar 2005
    Location
    Melbourne
    Posts
    135

    Default

    The following is from the Bradford web site:

    "Soundscreen installed between floors in 2 storey homes will reduce the amount of airborne noise transmission between floors."

    I have an identical situation, 250mm structafloor joists at 450mm centres, and so investigated this problem a short while ago. Although it is no longer there, I am sure that the last time I looked at the Bradford website the above went on to say that there wasn't much you could do to eliminate the impact noise of foot traffic other than wearing appropriate footwear. The airborne noise refers to the telly, radio, talking etc. I formed the opinion that it probably wasn't worthwhile installing interfloor soundproofing but I could be persuaded otherwise. The plaster is going up in the next couple of weeks hopefully so I have to make a decsion pretty soon.

  5. #5
    Join Date
    Oct 2004
    Location
    Brisbane
    Posts
    50

    Default

    Do put something in there, my folks regretted not doing that in their two story big reno

    Tom

  6. #6
    Join Date
    Sep 2004
    Location
    Strzelecki Ranges Victoria
    Posts
    395

    Default

    Airborne noise is the easier to eliminate by ceiling batts etc.
    Foot noise is the harder & comes down to the travel path created by the ceiling construction. For example a suspended ceiling (on rods) has less material to transfer through.
    Peter Clarkson

    www.ausdesign.com.au

    This information is intended to provide general information only.
    It does not purport to be a comprehensive advice.

  7. #7
    Join Date
    Jan 2005
    Location
    Newcastle/Tamworth
    Posts
    416

    Default

    Use rondo resilient ceiling mounts. They reduce impact sound transfer. Screw them to the joists and use 129 channel. A 4m x 5m room uses about 25 at $5 each.

    Also use heavy plasterboard such as 13mm fire resistant and batts.

    I used them in a 100 yr old place and they make a huge difference.

    Cheers
    Pulse

  8. #8
    Join Date
    May 2006
    Location
    Perth
    Posts
    4

    Default Thanks pulse

    Quote Originally Posted by Pulse
    Use rondo resilient ceiling mounts. They reduce impact sound transfer. Screw them to the joists and use 129 channel. A 4m x 5m room uses about 25 at $5 each.

    Also use heavy plasterboard such as 13mm fire resistant and batts.

    I used them in a 100 yr old place and they make a huge difference.

    Cheers
    Pulse

Similar Threads

  1. Timber Flooring Options, on top or rip it?
    By Theva in forum FLOORING
    Replies: 32
    Last Post: 31st July 2006, 01:26 AM
  2. Timber Strip Flooring
    By End Grain in forum FLOORING
    Replies: 11
    Last Post: 4th October 2005, 01:04 PM
  3. Timber Flooring
    By End Grain in forum FLOORING
    Replies: 2
    Last Post: 27th September 2005, 01:34 PM
  4. Timber Flooring options for new workshop
    By kiwigeo in forum FLOORING
    Replies: 12
    Last Post: 8th August 2004, 09:03 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •