Page 1 of 2 12 LastLast
Results 1 to 15 of 23
  1. #1
    Join Date
    Feb 2010
    Location
    Nunawading
    Posts
    53

    Default Difference between floor varnishes and furniture varnishes

    Hi all,

    In almost every hardware shop I see varnishes specified for furniture, floor or exterior.

    A project I'm working on is a slightly raised plywood home theatre stage which I plan to finish in a clear coating. Seeing as how it's so close to the ground I'm thinking of using a floor finish for better wear resistance. The catch is I'm also building a TV rack to sit on top of it, which for cost and time reasons, I'd like to finish in the exact same product.

    My question is what's the difference between the 3 (besides cost) and could you, for example, "upgrade" to an exterior finish for raw interior furniture without significant drawbacks? (likewise for floor finishes on interior furniture.)

  2. #2
    Join Date
    Jul 2010
    Location
    Adelaide
    Age
    42
    Posts
    0

    Default

    Exterior grade finishes are usually more resistant to UV exposure. Some internal finishes can take on a yellowish appearance when exposed to sunlight over time.

    Flooring finishes are more hardwearing, for obvious reasons. The drawback to them is that being designed to go on thicker with a mop or a roller, they don't spray to well.

  3. #3
    Join Date
    Apr 2010
    Location
    Indonesia
    Posts
    45

    Default

    The furniture is basically the easiest varnish in term application. It drying faster and most proper for furniture finish.
    The floor varnish has medium elasticity and strong enough tho withstand the abrasion since the activity on the floor.
    The spar varnish is varnish that is designed for finish the outdoor uses.It is more durable and strong to withstand the outside weather, but it need longer time to dry.

    Varnish for wood finishing

  4. #4
    Join Date
    Feb 2010
    Location
    Nunawading
    Posts
    53

    Default

    Thanks for your replies guys, now I understand!

  5. #5
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    3

    Default

    I have used floor varnish on a kitchen unit and a refurbished table where the surfaces were expected to get a fair amount of abuse from a growing family of demolition experts. You can thin it a bit to make application easier.
    Regards
    John

  6. #6
    Join Date
    Feb 2010
    Location
    Nunawading
    Posts
    53

    Default

    Quote Originally Posted by orraloon View Post
    I have used floor varnish on a kitchen unit and a refurbished table where the surfaces were expected to get a fair amount of abuse from a growing family of demolition experts. You can thin it a bit to make application easier.
    Regards
    John
    Thanks John, how did you apply it?

  7. #7
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    1

    Default

    I use floor finish on all my furniture these days, I have used Wattle Interior, exterior, F&W int, ext, Satin floor finish and I now by fate have Cabots CPF satin floor finish which has impressed me the most. Its very fine and easy to get a great finish. Have a look at all the pieces on my web site, almost all the later pieces are floor finish.
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

  8. #8
    Join Date
    Feb 2010
    Location
    Nunawading
    Posts
    53

    Default

    Quote Originally Posted by Claw Hama View Post
    I use floor finish on all my furniture these days, I have used Wattle Interior, exterior, F&W int, ext, Satin floor finish and I now by fate have Cabots CPF satin floor finish which has impressed me the most. Its very fine and easy to get a great finish. Have a look at all the pieces on my web site, almost all the later pieces are floor finish.
    Thanks Claw, your work is superb, love the look of solid wood. Might just have convinced me to try CPF

  9. #9
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    1

    Default

    I think you'll like it, I have only used it a couple of times but the difference in finish was noticable.
    Have fun
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

  10. #10
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    1

    Default

    PS, I never use the water base finishes due to having seen a couple of instances where liquids will go straight through them and leave stains in the timber,
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

  11. #11
    Join Date
    Jun 2005
    Location
    Sydney
    Posts
    313

    Default

    Clawhammer,

    I used Cabots CPF floor finish on an exterior bench lid/ seat over cypress pine, applied 3 coats with a brush, with one coat Feast Watson UV protected spar varnish . Extremely disappointed.
    Less than a year and it is almost all peeled off. The bench gets about 4 hours sun a day.
    I'm guessing I did something wrong?
    Cheers,
    Clinton

    "Use your third eye" - Watson

    http://www.flickr.com/photos/clinton_findlay/

  12. #12
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    1

    Default

    Hi Clinton, anything outside in the sun and elements I just don't use poly, you generaly have to sand and give another coat at least every 6 months and sometimes every 3. I use oils these days. The big Lutyens bench seat that I did a while back has been done with home brew Danish as are quite a few other items I have done for exterior use. With oil if you don't top it up every 3 - 6 months it doesn't mater much, it doesn't flake because the oil is in the timber and not on top. You just give it a light sand and splash on some more oil and you generally don't get patchy spots everywhere.
    If you use poly and you don't top it up, it flakes off and leaves spots and patches. It doesn't mater how much you sand them (unless you take them down to the bone again) you will still have dark and light spots. I look after a Blackbutt outdoor screen on the entry to an office block, it was polyed, even though I sand and coat it up several times a year it failed (blotchy and has some dark mould in the base of the uprights in about 3 -4 years. The owner has asked me to make another screen to replace it (not so bad I get another job out of it). This time I will use Danish and just stop by form time to time and wipe on a fresh coat. Thats my experience to this point anyway.

    PS. I think it says something about the recoats on the can doesn't it?

    PPS Cypress is very oily (expectorants) to start with so the poly probably doesn't get great penitration into it to start with and the expectorants may lift the poly as well.

    PPPS Deck oil is also good for a lot of those lid type things too, once again you still have to recoat and I have only had good success with oil base not the water base finishes.

    I think thats all
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

  13. #13
    Join Date
    Jun 2005
    Location
    Sydney
    Posts
    313

    Default

    thanks mate, clear and concise.
    (i guess I should read the can more often)
    Cheers,
    Clinton

    "Use your third eye" - Watson

    http://www.flickr.com/photos/clinton_findlay/

  14. #14
    Join Date
    Apr 2007
    Location
    Valentine, NSW
    Posts
    5

    Default Blackheart table

    Quote Originally Posted by Claw Hama View Post
    I use floor finish on all my furniture these days, I have used Wattle Interior, exterior, F&W int, ext, Satin floor finish and I now by fate have Cabots CPF satin floor finish which has impressed me the most. Its very fine and easy to get a great finish. Have a look at all the pieces on my web site, almost all the later pieces are floor finish.
    Your blackwood dining table inspired me as i already made a bed out of Blackwood and Blackheart sassafras. Making the table as we speak in school hols and i want to put the same surface coat on as yours - well done.

  15. #15
    Join Date
    Feb 2010
    Location
    Nunawading
    Posts
    53

    Default

    Claw, I hope you're still around because I have a question about CFP!

    I have a tough time getting all the CFP out of the brushes. It's a good deal thicker than regular poly and doesn't seem to like dissolving in turps very much. After washing my brushes twice and letting them dry I'm afraid I've already bricked one of them. Soaking it in turps softened it a bit but the tapered filaments are all glued together and the brush barely works anymore. How do you clean your brushes?

Similar Threads

  1. Polyurethane Varnishes
    By Stephene in forum FINISHING
    Replies: 2
    Last Post: 1st June 2006, 09:17 PM
  2. Re: Polyurethane Varnishes
    By TOMARTOM in forum FINISHING
    Replies: 5
    Last Post: 25th June 2001, 09:57 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •