Page 1 of 2 12 LastLast
Results 1 to 15 of 28
  1. #1
    Join Date
    May 2005
    Age
    72
    Posts
    36

    Default Took my eye off the ball

    G'day all,

    Well after nearly 30 years it's finally happened. This afternoon I was trying to finish off a box to house a profile sander. The body of the box was a nicely dovetailed cyprus pine unit, intended to house my Gifkins jig but I buggered it up. So, I thought I'd use it for something else.

    I put a bottom on it then started on the lid. In cutting the bits (on the table saw) to hold the sliding lid, I was pushing the timber into the blade with a push stick (right hand) and pulling the finished end with my left hand. What happened was that I was watching where the right hand was positioned and accidentally introduced the left thumb to the ripping blade. Ouch!!! I won't forget the feeling of blade contacting bone in a hurry. Didn't have any surgically clean stuff to dress it with so used the shirt I was wearing to stem the claret flow. Went to Doctor, yada, yada, yada...

    I'm totally disgusted with myself because I'm always so careful with this stuff.

    Anyway, there's a sore & sorry 10 finger typist writing this post with one finger at the moment. Point is, I could have done the same cut on the router if I wasn't so bloody slack. Hindsight is a wonderful thing.

    Be really careful,

    Keith

  2. #2
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default Youch!

    From one who has had 9 & 1/3 for 34 years now.

    I can still remember the throbing...
    Here is a tip... when you are walking, standing, sitting, put your sore hand on your head, palm up, rest the wrist in the middle of you head so the hand is slightly over the other side of your head to stop it sliding off. (Your hand, not your head. )

    Sleep on your back with your hand on a pillow or on your chest.

    The blood pressure to the sore bit is reduced & it helps relieve the throbbing.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  3. #3
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    YYYyeeeeoooowwwwhhhh!!!

    Not good Hope you manage a good night's sleep all the same.

    Currently I'm nursing a small chisel nick, not the same, but you always know it's there

    cheers
    Wendy

  4. #4
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    54
    Posts
    891

    Default

    Keith, sorry to hear that mate. Get well soon.

    Something is going on here. We have had so many accidents lately. What is the position of the moon at the moment?
    Visit my website at www.myFineWoodWork.com

  5. #5
    Join Date
    May 2005
    Location
    Newcastle
    Age
    73
    Posts
    1,064

    Default

    Ouch to the bone , thats gotta hurt for the next few days/weeks, and it always happens so quick.
    Keep it clean and away from infections your've got enough Problems

    (BTW good one finger typing)

    Rgds
    Ashore




    The trouble with life is there's no background music.

  6. #6
    Join Date
    Jan 2005
    Location
    Melbourne
    Age
    65
    Posts
    4,239

    Default

    Eeeyyccchh! I feel sorry for you Keith. Get well soon and thanks for sharing the reminder to the rest of us.

  7. #7
    Join Date
    Aug 2003
    Location
    Conder, ACT
    Age
    77
    Posts
    4,213

    Default

    Thank "G" for 'panadine forte' (sp).

    OOOooooooooowch

  8. #8
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869

    Default

    The trouble with this board is you get to know (and like) so many people, and this sort of news just sends a shudder down our collective spines.

    What can we say Keith, other than "We feel your pain".

    I hope it left enough for you to do your shoelaces up without needing therapy.

    P (shudder.)
    :eek: :eek: :eek:

  9. #9
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Quote Originally Posted by keith53
    . . . . What happened was that I was watching where the right hand was positioned and accidentally introduced the left thumb to the ripping blade.
    Deepest commiserations from a 9.9 fingered member (lost my ring finger tip on a joiner 28 years ago). The issue of trying to monitor too many variables is a classic problem around tools. You especially need to know where all your body parts are around tools.

    This evening I really frightened myself. I was doing some work on extending my table saw mitre and had the blade guard up because I was checking the length of the mitre extension. I drilled a couple of holes in a piece of timber and reached for the dusty switch because I was going to suck up the drill shavings. However, instead of the dusty switch I absent mindedly turned on the TS! Luckily nothing (including me!) was touching the blade. Yeah I know, for a start the TS should have been turned off at the switch, and I should have put the blade guard back down.

    If your story does nothing else it helps remind us all to take it all very carefully

  10. #10
    Join Date
    Oct 2003
    Location
    Sydney,Australia
    Posts
    42

    Default

    When I stuck my finger into the router bit, I could swear that time slowed down & I could feel every slice it took off. Luckily I pulled my finger away before things got too serious & all I have is a small pale spot/scar.

    And then the nurse asked why I hadn't kept the missing bit - I had to explain that it was a thin red mist across the back yard:eek:

  11. #11
    Join Date
    May 2005
    Location
    Eden Hills, South Australia
    Age
    63
    Posts
    87

    Default

    Yerch! A very sober reminder. So sorry about your accident. Hope you can relax, and that there're no complications.

    Suggest rum and coke for medicinal purposes.
    Those are my principles, and if you don't like them . . . well, I have others.

  12. #12
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    54
    Posts
    891

    Default

    We need a new forum for all the casualties.
    Visit my website at www.myFineWoodWork.com

  13. #13
    Join Date
    Sep 2005
    Location
    Hobart
    Age
    44
    Posts
    0

    Default

    Quote Originally Posted by Wongo
    We need a new forum for all the casualties.
    It is beginning to seem that way! Maybe I should give up while I am still intact.

    Anyway, sorry to hear about your accident Keith! I reckon that Cliff's advice sounds like sage advice from someone who knows...

    Cam
    <Insert witty remark here>

  14. #14
    Join Date
    Jul 2003
    Location
    Near Bodgy, AlexS, Wongo & CraigB
    Age
    19
    Posts
    744

    Default

    [QUOTE=bitingmidge]

    "We feel your pain".

    [QUOTE]

    I certaininly hope not!
    Zed

  15. #15
    Join Date
    Feb 2006
    Location
    Lindfield N.S.W.
    Age
    63
    Posts
    1,644

    Default

    As a relatively recent participant to WWF, the greatest number of these reports relate to power tools. Is this the best argument for going over to the darkside?
    Cheers

    Jeremy
    If it were done when 'tis done, then 'twere well it were done quickly

Similar Threads

  1. An eye for proportions
    By Groggy in forum JOKES
    Replies: 2
    Last Post: 18th June 2005, 10:13 PM
  2. Queer Eye
    By simon c in forum HAVE YOUR SAY
    Replies: 33
    Last Post: 12th March 2005, 11:44 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •