![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
-
30th October 2007, 04:04 PM #1
Member
- Join Date
- Feb 2005
- Location
- Perth
- Posts
- 9
retaining wall Q. How do you stop backfill during installation?
G'day all,
I'm planning to install a pillar and post concrete retaining wall system similar to the one here http://twinside.com.au/walls_fences_perth.htm.
I am only retaining around 900mm, however I want to get around 500mm from the existing asbestos fence. What i don't get is how I'm going to stop all the earth falling away from the fence (and consequenctly the fence falling onto me!! ) when I go to dig the 900mm down + 1400mm footings during the installation.
Are there any tips or tricks I could use to help me out?
Thanks a bunch.
Antisense ^_^antisense ^_^
---------------------------------------------
There is no such thing as a stupid question
- unless it's asked by me
-
30th October 2007, 04:20 PM #2
I put up a few of my own retaining walls when I was in sydney and did one at home since I have been up in queensland. You shouldn't have any trouble with the earth crumbling away when you dig, I haven't found that a problem. The earth is pretty much compacted and tends to stay where it is but maybe in some soils it might be a different kettle of fish.
You could brace the fencs to stop it from toppling on you if it is a very high fence but I have never had trouble with the earth falling to that extent. 500mm gives you a fair buffer.
I am sure someone with more experience will be able to help you out on this.
Good luck with the new wall, it looks good on the website.Last edited by munruben; 30th October 2007 at 04:21 PM. Reason: spelling mistake
Reality is no background music.
Cheers John
-
31st October 2007, 10:52 AM #3
Member
- Join Date
- Feb 2005
- Location
- Perth
- Posts
- 9
Thanks for the advice,
I'll give it a crack. Hopefully it doesn't turn into a nightmare job
Antisense ^_^antisense ^_^
---------------------------------------------
There is no such thing as a stupid question
- unless it's asked by me
-
3rd November 2007, 05:06 PM #4
Senior Member
- Join Date
- Nov 2005
- Location
- Kilsyth
- Age
- 66
- Posts
- 300
dig a hole about 400mm deep, if the sides dont fall in you should be fine for doing your wall, if the sides do fall in you are in for a spot of bother
)
Similar Threads
-
Advice Needed: Hefty Retaining Wall + Garage (Photos)
By RedRaven in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 4Last Post: 13th October 2007, 08:59 AM -
Fence and Retaining Wall
By derekh in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 1Last Post: 7th September 2007, 02:10 PM -
Tall Retaining wall and fence
By jgib in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 2Last Post: 29th March 2007, 12:09 PM -
Combined fence and retaining wall
By pedro the swift in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 8Last Post: 30th January 2007, 04:17 PM -
Retaining Wall
By Flyboy in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 3Last Post: 12th February 2006, 08:00 AM