Results 1 to 4 of 4
-
14th July 2007, 02:44 AM #1
New Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 4
Problems during stud adhesive application on battens
Hi all,
Just wanted to know if anyone is having problems or difficulties during operation when applying stud adhesive for plasterboard to batten installation....
Thanks
Kyaw
-
14th July 2007, 06:15 AM #2
Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Hi and welcome
More info is needed, timber or steel battens?
Al
-
14th July 2007, 07:32 AM #3
New Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 4
Steel battens.
-
14th July 2007, 01:43 PM #4
quality + reliability
- Join Date
- Jul 2006
- Location
- Melbourne
- Posts
- 675
It shouldn't be difficult?? What sort of problem are you having?
You should apply walnut size daubs with a small joint knife. Sometimes if the adhesive is a bit wet the daubs can fall off the battens a bit. In which case you need to spread it a bit as well, to take hold of the batten. Just make sure you still have about 20mm depth of adhesive on the batten.
CheersGreat plastering tips at
www.how2plaster.com
Reply With QuoteSimilar Threads
-
Ceiling Battens?
By John99 in forum PAINTING, PLASTERING, TILING, DECORATING, etc.Replies: 32Last Post: 16th September 2007, 10:45 PM -
Aircond. in Stud Wall HELP!
By ptrott in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 4Last Post: 14th January 2005, 04:34 PM
Bookmarks