Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Hebel Blocks
-
16th November 2005, 09:28 PM #1
Senior Member
- Join Date
- Nov 2004
- Location
- Melbourne
- Posts
- 74
Hebel Blocks
G'day All,
Where can I get a couple of blocks of that Hebel stuff in Melbourne outer east, just need to do a small job, does anyone know the size blocks they sell, and roughly cost...Thanks Leeton
-
16th November 2005, 09:36 PM #2
Dissenting opinion
- Join Date
- May 2005
- Location
- Turramurra, NSW
- Posts
- 0
Used to, but can't remember. I think they're from CSR, try their web site.
Incidentally, great product if a bit exxxyBodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
16th November 2005, 09:55 PM #3
Senior Member
- Join Date
- Oct 2002
- Location
- Melb, Vic
- Age
- 55
- Posts
- 0
Paveworld in Campbellfield (hume hwy)
come in standard 200 x 200 x any length. but most sizes can be ordered
a 200 x 200 x 600 block is $9
all from memory though.
check csr website
gc
-
16th November 2005, 09:56 PM #4
Novice
- Join Date
- Jan 2004
- Location
- Mackay Qld
- Posts
- 11
Hebel -try dealers
Hi
your friendly local Hebel dealer can be looked up through the CSR website.
The dealer will more than likely have offcuts and /or leftover blocks.
As well as blocks Hebel is produced in sheets up to 2.8 x 1.00 meters.
My house is retro clad with Hebel and is termite proof ,rotproof and has a 3 hr firewall rating (well! on the outside anyway ).
The hebel dealer is usually a builder and should have the means to cut blocks or sheets to size. Be aware some sheets have metal re inforcing rods embedded in them. Hebel will cut with a carbide tipped blade. Blocks run to 75 mm thick.Dunno about blocks though ,I have never had anything to do with them.
Grahame
